Q: Compute the average emissivity of anodized aluminum at 100°C and
Compute the average emissivity of anodized aluminum at 100°C and 650°C from the spectral curve in Fig. 11.17. Assume /
See AnswerQ: An 0.2-m-OD oxidized steel pipe at
An 0.2-m-OD oxidized steel pipe at a surface temperature of 756 K passes through a large room in which the air and the walls are at 38°C. If the heat transfer coefficient by convection from the surfac...
See AnswerQ: A 6-mm-thick sheet of polished 304 stainless steel
A 6-mm-thick sheet of polished 304 stainless steel is suspended in a comparatively large vacuum-drying oven with black walls. The dimensions of the sheet are 30 cm * 30 cm, and its specific heat is 56...
See AnswerQ: Calculate the equilibrium temperature of a thermo- couple in a large
Calculate the equilibrium temperature of a thermo- couple in a large air duct (see the figure) if the air temperature is 1367 K, the duct-wall temperature is 533 K, the emissivity of the thermocouple...
See AnswerQ: Liquid oxygen (LOX) for the space shuttle is stored at
Liquid oxygen (LOX) for the space shuttle is stored at 90 K prior to launch in a spherical container 4 m in diameter. To reduce the loss of oxygen, the sphere is insulated with superinsulation develop...
See AnswerQ: Repeat Problem 11.52 with the addition of a radiation shield
Repeat Problem 11.52 with the addition of a radiation shield with emissivity /
See AnswerQ: A thermocouple is used to measure the temperature of a flame in
A thermocouple is used to measure the temperature of a flame in a combustion chamber. If the thermocouple temperature is 1033 K and the walls of the chamber are at 700 K, what is the error in the ther...
See AnswerQ: A metal plate is placed in the sunlight. The incident radiant
A metal plate is placed in the sunlight. The incident radiant energy G is 780 W/m2. The air and the surroundings are at 10°C. The heat transfer coefficient by natural convection from the upper surface...
See AnswerQ: A 60-cm-square section of panel heater is installed
A 60-cm-square section of panel heater is installed in the corner of the ceiling of a room having a 2.7-m * 3.6-m floor area with an 2.4-m ceiling. If the surface of the heater, made from oxidized ir...
See AnswerQ: In a manufacturing process, a fluid is transported through a cellar
In a manufacturing process, a fluid is transported through a cellar maintained at a temperature of 300 K. The fluid is contained in a pipe having an external diameter of 0.4 m. The pipe surface has an...
See Answer
