A 100W light bulb has a resistance of 10 Ω at room temperature (2.00 × 101 ◦C). The light bulb is called “100W” because it will dissipate 100W of power when it is connected to a 120 V potential difference. What is the temperature of the tungsten element in the light bulb when it is operating as normal?
> Social skill training is the best form of behavioral therapy that assist in comprehending an environment in getting the needed response for adaptable stability. People suffering from major depressive disorder can benefit a lot from social skills training
> How adding self-awareness, self-esteem, and boundaries to the social-skills training would be taught to individuals with ASD? What are the benefits in including these skills to the social-skills training?
> What are social skills?
> A common characteristic of ADHD is specific difficulties with mathematical concepts. the tendency to ignore social rules. delays in cognitive skill development paired with high social competence. delays in social competence paired with advanced cognitive
> Why do you think that Marx and Engels have been influential? Do you think that this influence has been for good or for ill? Do Marx and Engels see capitalism as a permanent system? How do they think that capitalism will change over time? Has their analys
> Why are social skills so important for students in educational settings and why are social skills even more important for students with disabilities?
> What are some of the challenges social work students have with social work practice skills in the field and what do students less challenging with social work skills?
> According to the article, which teenager will experience more distress when pressured by friends to engage in risky behavior? According to the article, which teenager will experience more distress when pressured by friends to engage in risky behavior?
> Social problem-solving skills are. a. social skills needed to solve cognitive tasks. b. cognitive skills required when children solve problems jointly with parents or peers. c. skills needed to solve social dilemmas. d. skills that exploit the social con
> Match the terms with the letters below. mass or specialized media available to anyone who chooses to subscribe or tune in standards as varying or flexible in their application to specific occasions or situations websites on the intranet that are dorman
> According to Karl Marx and Friedrich Engels, capitalism would lead to conflict between these two groups: a. The people living in industrialized nations and the people in non-industrialized societies. b. Farmers and urban workers who earn a wage. c. The
> In which ways have Marx and Engels expressed antagonism and rejection toward the bourgeoisie and capitalism?
> In which ways have Marx and Engels expressed admiration for the bourgeoisie and capitalism?
> Karl Marx and Friedrich Engels, 1. What does Marx and Engels mean by alienation? 2. What do they mean by "externalization of labor"? 3. How did the division and inequality of classes come to be, according to them?
> In which ways have Marx and Engels expressed admiration for the bourgeoisie and capitalism? In which ways have Marx and Engels expressed antagonism and rejection toward the bourgeoisie and capitalism? In which ways are Marx and Engels ideas relevant for
> A student is interested in studying social skills among college students. His professor asked, "How will you measure social skills?" The student replies, "with the number of friends each participant has at the university." This instance of specifying how
> Emotional intelligence is demonstrated through 1. Social awareness, social skills and self-profiles 2. Selfish attitude, self-management, and social skills 3. Networking, social skills, and self-profiles 4. Self-awareness, self-management and social
> Suppose a spring with spring constant 3 N/m is horizontal and has one end attached to a wall and the other end attached to a mass. You want to use the spring to weigh items. You put the spring into motion and find the frequency to be 0.5 Hz (cycles per s
> Suppose a spring with spring constant 9 N/m is horizontal and has one end attached to a wall and the other end attached to a mass. You want to use the spring to weigh items. You put the spring into motion and find the frequency to be 1.4 Hz (cycles per s
> Suppose you have a spring with a spring constant of 75.0 N/m, and you attach a 0.65 kg mass to it. A. How far does the spring stretch to its new equilibrium position? B. How fast is the mass traveling when it reaches the new equilibrium position?
> You obtain a 100-W light bulb and a 50-W light bulb. Instead of connecting them in the normal way, you devise a circuit that places them in series across normal household voltage. Which statement is correct?
> a. Draw ray diagrams of a nearsighted eye looking at an object that is very far away and another object that is very close. b. Draw ray diagrams of a farsighted eye looking at an object that is very far away and another object that is very close. c. What
> Suppose you have a mass m = 5.3 kg attached to a spring with spring constant k = 6.3 N/m. Pull the spring back and let it go. What will be the period T?
> Draw the ray diagram for nearsighted people to converge the parallel incoming rays and label where the image will be. Explain what kind of corrective lens you should use. Answer the same question for farsighted people.
> Consider two thin lenses, one of focal length f1 and the other of focal length f2, placed in contact with each other, as shown in figure p23.56) Apply the thin-lens equation to each of these lenses and combine the results to show that this combination of
> The figure shows a combination of two lenses. A. Find the position of the final image of the 1.0-cm-tall object. B. Find the size of the final image of the 1.0-cm-tall object. C. Find the orientation of the final image of the 1.0-cm-tall object. s=
> If you are driving 110km/h along a straight road and you look to the side for 2.0s, how far do you travel during this inattentive period?
> In the next series of questions, you will use the formula / to calculate the work done by various forces on an object that moves 160 meters to the right. W = F.3 = F5 cos 0 30 N 12 N 30° 18 N 40 15 N 160 m В
> Two eagles fly directly toward one another, the first at 15 m/s and the second at 22 m/s. Both screech, the first one emitting a frequency of 2950 Hz and the second one emitting a frequency of 3950 Hz. a. what frequency of sound, in hertz, does the first
> In the figure below, the pulley has negligible mass, and both it and the inclined plane are frictionless. Block A has a mass of 1.00 kg, block B has a mass of 2.00 kg and the angle of the incline is 30. If the blocks are released from rest, what is the v
> A 60 gallon compressor is filled with air at a pressure of 155 PSI. An empty air tank with a volume of 10 gallons is connected the compressor. What is the maximum pressure that the air tank can filled to? Compressor Air Tank (60 gallons @ 10 gallons
> What happens inside an empty tank when it is filled with air, and why? A. The temperature decreases B. The temperature increases C. No difference
> In the figure below, the pulley has negligible mass and is frictionless. The coefficient of static friction, μs, between block A and the incline in 0.430. Block A has a mass of 1.00 kg, block B has a mass of 2.00 kg and the angle of the incline is 300.
> Suppose you have a spring with a spring constant of 75.0 N/m, and you attach a 0.65 kg mass to it. How fast is the mass traveling when it reaches the new equilibrium position?
> In the figure below, the pulley has negligible mass, and both it and the inclined plane are frictionless. Block A has a mass of 1.00 kg, block B has a mass of 2.00 kg and the angle of the incline is 30.0degree. If the blocks are released from rest, what
> In the figure below, the pulley has negligible mass, and both it and the indicted plane are frictionless. Block A has a mass of 1.0 kg, and block B has a mass of 2.0 kg, and angle theta is 30 degree. If the blocks are released from rest with the connecti
> In the figure below, the pulley has negligible mass, and both it and the inclined plane are frictionless. Block A has a mass of 1.0 kg, and block B has a mass of 2.0 kg, and angle θ is 30°. If the blocks are released from rest wit
> Two eagles fly directly toward one another, the first at 15.0 m/s and the second at 16.2 m/s. Both screech, the first emitting a frequency of 3943 Hz and the other one of 3800 Hz. What frequencies do they receive if the speed of sound is 330 m/s? (Enter
> Two eagles fly directly toward one another, the first at 15.0 m/s and the second at 25.0 m/s. Both screech, the first one emitting a frequency of 3100 Hz and the second one emitting a frequency of 3800 Hz. What frequencies (in Hz) do they receive if the
> Two eagles fly directly toward one another, the first at 15.0 m/s and the second at 28.0 m/s. Both screech, the first one emitting a frequency of 2700 Hz and the second one emitting a frequency of 3800 Hz. What frequencies (in Hz) do they receive if the
> Two eagles fly directly toward one another, the first at 15.0 m/s and the second at 24.0 m/s. Both screech, the first one emitting a frequency of 2600 Hz and the second one emitting a frequency of 3800 Hz. What frequencies (in Hz) do they receive if the
> Two eagles fly directly toward one another, the first at 15.0 m/s and the second at 19.0 m/s. Both screech, the first one emitting a frequency of 3500 Hz and the second one emitting a frequency of 3800 Hz. What frequencies (in Hz) do they receive if the
> A SCUBA tank with internal volume of 11.0 liters is slowly filled with air to bring its internal pressure up to 200 atmospheres. a. What volume of 200C air at normal 1.00 atm pressure will fill the tank at 200 atm? b. How much more does the filled tank
> 1. When you apply a 50 N force, a spring extends 15 cm. Assume the spring obeys Hooke's Law. What is the spring constant (in N/m) for this spring? 2. As above, when you apply a 50 N force, a spring extends by 15 cm. How much energy was required to stret
> Two crates, A and B, are in an elevator as shown. The mass of crate A is greater than the mass of crate B. Elevator B Constant speed b. As the elevator approaches its destination, its speed decreases. (It continues to move downward.) i. How does th
> Which of the following quantities are a non-zero constant for an object traveling in a circle at a constant speed? There may be more than one correct answer. Velocity Acceleration Net force Radial component of velocity Tangential component of velocit
> Which of the following quantities are zero for an object traveling in a circle at a constant speed? There may be more than one correct answer. Velocity Acceleration Net force Radial component of velocity Tangential component of velocity Radial compon
> If a 1kg object could be converted entirely into energy, how long could a 100W light bulb stay illuminated? A 100W bulb uses 100j of energy each second.
> 1. How does the resistance of a 100W light bulb compare to the resistance of a 60W light bulb? A. The 100W light bulb has a higher resistance than the 60W light bulb. B. The 100W light bulb has a lower resistance than the 60W light bulb. C. The 100W l
> Two light bulbs, one rated 50 W and a second rated 100 W are both supposed to be connected to a 110 V source of emf. Which of the following is true? a. The 50W bulb has twice the resistance as the 100W bulb b. The 50W bulb has four times the resistance o
> A light bulb of 100W emits green light (wavelength of 500 nm). How many photons are emitted from the light bulb in a second?
> 2a. It takes 4 old fashioned 100W filament light bulbs to light up a given room. If that room is lit up 14 hours per day, and electricity costs $0.15/kWh, how much does it cost to light up that room for a 30-day month? 2b. How much would it cost to light
> A light bulb of 100W emits green light (wavelength of 500 nm photons are emitted from the light bulb in a second?
> Suppose you have a spring with a spring constant of 75.0 N/m, and you attach a 0.65 kg mass to it. How fast is the mass traveling when it reaches the new equilibrium position?
> You have a 50W light bulb and a 100W light bulb. These power ratings are for an applied voltage of 100 volts. Prove that the 50W bulb will be brighter than the 100W bulb if they are connected in series. Explain why the lights dim when you turn on your ha
> A 100W incandescent light bulb is plugged into a 120V/60Hz outlet. What is the resistance of the light bulb filament? What is the peak current of the bulb?
> The driver of a car slams on the brakes when he sees a tree blocking the road. The car slows uniformly with acceleration of -5.35 m/s2 for 4.00 s, making straight skid marks 61.5 m long, all the way to the tree. With what speed does the car then strike t
> The driver of a car slams on the brakes when he sees a tree blocking the road. The car slows uniformly with acceleration of -5.80 m/s2 for 4.40 s, making straight skid marks 63.2 m long, all the way to the tree. With what speed does the car then strike t
> The driver of a car slams on the brakes when he sees a tree blocking the road. The car slows uniformly with acceleration of -5.70 m/s2 for 4.45 s, making straight skid marks 63.5 m long, all the way to the tree. With what speed does the car then strike t
> Which light bulb has the larger resistance, a 50W-bulb or a 100W bulb?
> The driver of a car slams on the brakes, causing the car to slow down at a rate of 24ft/s2 as the car skids 332ft to a stop. How long does the car take to stop? What was the car's initial speed?
> A 60W light bulb and a 100W light bulb are connected in a circuit If the bulbs are connected in series, will the voltage be greater across the 60W bulb or across the 100W bulb? a. The potential difference across the 60W bulb will be larger b. The poten
> Consider a 50W light bulb and a 100W light bulb connected to a household outlet. Which of the following statements is true? A. The 50W light bulb has more current and less resistance. B. The 100W light bulb has more current and less resistance. C. The 50
> How does the resistance of a 100W light bulb compare to the resistance of a 60W light bulb? a. The 100W light bulb has a higher resistance than the 60W light bulb. b. The 100W light bulb has a lower resistance than the 60W light bulb. c. The 100W light b
> Suppose you have a mass m attached to a spring constant k (N/m). The mass rests on a horizontal frictionless surface. Its equilibrium position is at x= 0. It is pulled aside a distance A and released. a. What is its speed as it passes the position x=0? b
> A Boeing 747 is taxiing along the runway. The graph below shows the angular velocity, w, of the wheels versus time. Answer the following questions: Angular Velocity (m)(rad/s) 100 75 20 40 80 95 Time (s) a) Select from the following options to desc
> Use the points selected to find the time constant; 4.0348x10-a s. 2.7217x10° V %3D %3. 3D %3D %3D 4.2099x10- s. 10017x10° V 0.025 0.030 0.035 0.040 0.045 0.05
> If you are driving 102 km/h along a straight road how fast are you going?
> If you are driving 95 km/h along a straight road and you look to the side for 2.5s, how far do you travel during this inattentive period?
> A car accelerates along a straight road from rest to 90 km/h in 5.0s. What is the magnitude of average acceleration in meters per second square.
> If you are driving 110km/h along a straight road and you look to the side for 2.0 seconds, how far do you travel during this inattentive period?
> The average density of the human body is 985 kg/m3, and the typical density of seawater is about 1020 kg/m3. a. The average density of the human body, after maximum inhalation of air, changes to 945 kg/m3. As a person floating in seawater inhales and exh
> How many revolutions does the object make during the first 4.o s?
> Find the work W done by the 18-newton force. 30 N 12 N 30° 18 N 40 15 N 160 m B
> Suppose you wish to measure the friction a mass of 0.1 kg experiences as it slides along a floor (you wish to find c). You have a spring with spring constant k = 5 N/m. You take the spring, you attach it to the mass and fix it to a wall. Then you pull on
> Suppose you have a mass "m" attached to a spring with constant "k" (in units of N/m). The mass rests on a horizontal frictionless surface. Its equilibrium position is at x = 0. It is pulled aside a distance A and released. What is the speed of the mass a
> Suppose that is a set of vectors in some vector space. State the precise definition of linear independence of V. Explain linear independence of vectors in your own words. V = { v , v2 ,V3 , • v,} ...
> Let S be the statement: All natural numbers are real numbers. Complete the sentences below, filling in A-G from the following list, and T or F for true or false, as appropriate. Note: Enter A for A. (i.e. don't include the '.'), etc. in the spaces provid
> Solve the following initial value problem. (3z + 8) (3² + 4) dz - 4y (z² + 5z + 6) dy = 0, y(1) = 2. %3D 2) Solve the following initial value problem. * [v - 3(e* + 1)*] dz + (e* + 1) dy = 0, v(0) = 4. %3D 3) Solve the following initial value problem
> 1. Why do you think social skills are important in the workplace (internship site and/or future places of employment)? 2. What do you feel are the most important social skills one should always use in the workplace? 3. Provide a personal example (from
> All of the following statements would be considered true of a company's mission statement except which one? A. A company's mission is an enduring statement of a firm's intent B. A mission statement typically identifies the firm's principal products and s
> What is the significance of a mission statement? Research the mission statement of your organization or a well-known entity. Does the mission statement accurately answer the questions identified in your textbook that a good mission statement should answe
> 1. Create a revised vision and mission statement for Tesla Inc. Current Mission Statement: “Tesla’s mission is to accelerate the worlds transition to sustainable energy.” Revised Vision Statement: Revised Mission Statement:
> Which of the following is in the correct order? vision statement, mission statement, strategic planning, operational planning, and tactical planning mission statement & vision statement, strategic planning, tactical planning, operational planning control
> Mission statement for Southwest Airlines Write down their mission statement. Briefly evaluate this statement. If you cannot locate a mission statement write your suggested statement.
> Focusing on the Disney parks, explore the way Disney markets itself. In your introduction, discuss who Disney is, when they first got started, and who was responsible for the concept. In the body of your report, respond to each of the questions below. •
> 1. Research the cross functional sourcing teams revealed that teams that included suppliers as active team participants put forth greater effort, on effort, on average, than teams that did not include suppliers. Discuss why the involvement of external su
> What types of strategies might a management team be planning, if they wish to conduct a Product Life Cycle analysis?
> Which of the following is a reason to undertake risk management? Identify each valid reason. Legislative compliance Good management practice Identifying potential opportunities and challenges Developing team support
> Define mission statement. Describe the importance of developing an explicit mission statement and the possible elements of a mission statement.
> Discuss the role of packaging in a firm's total product offer.
> What aspects of the total product offer do you consider when you are looking for a cell phone to buy? What is the total product offer you consider when looking for a car to buy?
> From a marketing management perspective, what is the meaning of a total product offer? What are the important elements in the total product offer or local college?
> Post the mission statements of two companies and discuss how the mission statements can be improved by re-writing them. The two companies are Delta Airlines and Blue Cross and Blue shield.
> The production benchmarks data on p. 6 of each issue of the Footwear Industry Report provide solid evidence of whether a company is managing its total compensation, workforce productivity, production labor costs, total production costs and reject rates
> If a company is pursuing a strategy to produce branded footwear at a low total production cost relative to rival companies, then it should regularly review A. the production cost benchmarking data on p. 6 of each issue of the Footwear Industry Report to
> The production benchmarks reported on p. 6 of each year's Footwear Industry Report is of value only to companies striving to produce branded footwear at lower costs than rivals and can see how their costs stack up against the industry low values on p. 6
> Pick a company that you would like to work for after graduation and assume that you have been asked to interview with them for a job next month. Analyze how social media can help you prepare for your interview using the following questions and activities
> 1. How is Quality an integral part of strategic management and how it impacts an organization's competitive advantage? 2. How does Ethics act as an integral part of strategic management and how it impacts an organization's competitive advantage.
> How can a health care organization create an effective social media initiative in its marketing program that would support the organization's overall marketing agenda?
