Question: A nail in a pine board stops

> A block is placed against the vertical front of a cart (Fig. P5.95). What acceleration must the cart have so that block A does not fall? The coefficient of static friction between the block and the cart is

> You are riding in an elevator on the way to the 18th floor of your dormitory. The elevator is accelerating upward with a = 1.90 m/s2. Beside you is the box containing your new computer; the box and its contents have a total mass of 36.0 kg. While the ele

> Two objects, with masses 5.00 kg and 2.00 kg, hang 0.600 m above the floor from the ends of a cord that is 6.00 m long and passes over a frictionless pulley. Both objects start from rest. Find the maximum height reached by the 2.00-kg object.

> Block B, with mass 5.00 kg, rests on block A, with mass 8.00 kg, which in turn is on a horizontal tabletop (Fig. P5.92). There is no friction between block A and the tabletop, but the coefficient of static friction between blocks A and B is 0.750. A ligh

> In terms of m1, m2, and g, find the acceleration of each block in Fig. P5.91. There is no friction anywhere in the system. Fig. P5.91: Figure P5.91 m m2

> Two blocks connected by a cord passing over a small, frictionless pulley rest on frictionless planes (Fig. P5.90). (a) Which way will the system move when the blocks are released from rest? (b) What is the acceleration of the blocks? (c) What is the tens

> Block A in Fig. P5.89 has mass 4.00 kg, and block B has mass 12.0 kg. The coefficient of kinetic friction between block B and the horizontal surface is 0.25. (a) What is the mass of block C if block B is moving to the right and speeding up with an accele

> For the cases shown in Fig. Q6.8, the object is released from rest at the top and feels no friction or air resistance. In which (if any) cases will the mass have (i) the greatest speed at the bottom and (ii) the most work done on it by the time it reache

> A 12.0-kg box rests on the level bed of a truck. The coefficients of friction between the box and bed are

> Block A in Fig. P5.87 weighs 1.90 N, and block B weighs 4.20 N. The coefficient of kinetic friction between all surfaces is 0.30. Find the magnitude of the horizontal force F S necessary to drag block B to the left at constant speed if A and B are connec

> You are called as an expert witness in a trial for a traffic violation. The facts are these: A driver slammed on his brakes and came to a stop with constant acceleration. Measurements of his tires and the skid marks on the pavement indicate that he locke

> Two identical 15.0-kg balls, each 25.0 cm in diameter, are suspended by two 35.0-cm wires (Fig. P5.85). The entire apparatus is supported by a single 18.0-cm wire, and the surfaces of the balls are perfectly smooth. (a) Find the tension in each of the th

> If the coefficient of static friction between a table and a uniform, massive rope is

> A 40.0-kg packing case is initially at rest on the floor of a 1500-kg pickup truck. The coefficient of static friction between the case and the truck floor is 0.30, and the coefficient of kinetic friction is 0.20. Before each acceleration given below, th

> A hammer is hanging by a light rope from the ceiling of a bus. The ceiling is parallel to the roadway. The bus is traveling in a straight line on a horizontal street. You observe that the hammer hangs at rest with respect to the bus when the angle betwee

> You are standing on a bathroom scale in an elevator in a tall building. Your mass is 64 kg. The elevator starts from rest and travels upward with a speed that varies with time according to v(t)=(3.0 m/s2)t +(0.20 m/s3)t2. When t = 4.0 s, what is the read

> You are designing an elevator for a hospital. The force exerted on a passenger by the floor of the elevator is not to exceed 1.60 times the passenger’s weight. The elevator accelerates upward with constant acceleration for a distance of 3.0 m and then st

> Block A in Fig. P5.79 weighs 1.20 N, and block B weighs 3.60 N. The coefficient of kinetic friction between all surfaces is 0.300. Find the magnitude of the horizontal force F S necessary to drag block B to the left at constant speed (a) if A rests on B

> In Example 5.5 (Section 5.1), how does the work done on the bucket by the tension in the cable compare with the work done on the cart by the tension in the cable? Example 5.5: Your firm needs to haul granite blocks up a 15° slope out of a qu

> High-speed motion pictures (3500 frames/second) of a jumping 210-

> A block with mass m1 is placed on an inclined plane with slope angle a and is connected to a hanging block with mass m2 by a cord passing over a small, frictionless pulley (Fig. P5.74). The coefficient of static friction is ms, and the coefficient of kin

> Block A in Fig. P5.76 weighs 60.0 N. The coefficient of static friction between the block and the surface on which it rests is 0.25. The weight w is 12.0 N, and the system is in equilibrium. (a) Find the friction force exerted on block A. (b) Find the ma

> You place a book of mass 5.00 kg against a vertical wall. You apply a constant force

> In Fig. P5.74,

> An 8.00-kg box sits on a ramp that is inclined at 33.0° above the horizontal. The coefficient of kinetic friction between the box and the surface of the ramp is

> A 6.00-kg box sits on a ramp that is inclined at 37.0° above the horizontal. The coefficient of kinetic friction between the box and the ramp is

> Two boxes connected by a light horizontal rope are on a horizontal surface (Fig. E5.37). The coefficient of kinetic friction between each box and the surface is

> A 5.00-kg box sits at rest at the bottom of a ramp that is 8.00 m long and is inclined at 30.0o above the horizontal. The coefficient of kinetic friction is

> A 3.00-kg box that is several hundred meters above the earth’s surface is suspended from the end of a short vertical rope of negligible mass. A time-dependent upward force is applied to the upper end of the rope and results in a tension in the rope of T(

> If work W is required to stretch a spring a distance x from its un stretched length, what work (in terms of W) is required to stretch the spring an additional distance x?

> A 2.00-kg box is suspended from the end of a light vertical rope. A time-dependent force is applied to the upper end of the rope, and the box moves upward with a velocity magnitude that varies in time according to v(t)=(2.00 m/s2)t + (0.600 m/s3)t2. What

> When you do a chin-up, you raise your chin just over a bar (the chinning bar), supporting yourself with only your arms. Typically, the body below the arms is raised by about 30 cm in a time of 1.0 s, starting from rest. Assume that the entire body of a 6

> A box is sliding with a constant speed of 4.00 m/s in the +x-direction on a horizontal, frictionless surface. At x = 0 the box encounters a rough patch of the surface, and then the surface becomes even rougher. Between x = 0 and x = 2.00 m, the coefficie

> A solid uniform 45.0-kg ball of diameter 32.0 cm is supported against a vertical, frictionless wall by a thin 30.0-cm wire of negligible mass (Fig. P5.65). (a) Draw a free-body diagram for the ball, and use the diagram to find the tension in the wire. (b

> A horizontal wire holds a solid uniform ball of mass m in place on a tilted ramp that rises 35.0° above the horizontal. The surface of this ramp is perfectly smooth, and the wire is directed away from the center of the ball (Fig. P5.64). (a) D

> In a repair shop a truck engine that has mass 409 kg is held in place by four light cables (Fig. P5.63). Cable A is horizontal, cables B and D are vertical, and cable C makes an angle of 37.1o with a vertical wall. If the tension in cable A is 722 N, wha

> In Fig. P5.62 a worker lifts a weight w by pulling down on a rope with a force F S. The upper pulley is attached to the ceiling by a chain, and the lower pulley is attached to the weight by another chain. Draw one or more free-body diagrams to find the t

> Two ropes are connected to a steel cable that supports a hanging weight (Fig. P5.61). (a) Draw a free-body diagram showing all of the forces acting at the knot that connects the two ropes to the steel cable. Based on your diagram, which of the two ropes

> An adventurous archaeologist crosses between two rock cliffs by slowly going hand over hand along a rope stretched between the cliffs. He stops to rest at the middle of the rope (Fig. P5.60). The rope will break if the tension in it exceeds 2.50 Ã

> You are a Starfleet captain going boldly where no man has gone before. You land on a distant planet and visit an engineering testing lab. In one experiment a short, light rope is attached to the top of a block and a constant upward force F is applied to

> When a certain force is applied to an ideal spring, the spring stretches a distance x from its un stretched length and does work W. If instead twice the force is applied, what distance (in terms of x) does the spring stretch from its un stretched length,

> An 8.00-kg box sits on a level floor. You give the box a sharp push and find that it travels 8.22 m in 2.8 s before coming to rest again. (a) You measure that with a different push the box traveled 4.20 m in 2.0 s. Do you think the box has a constant acc

> The table* gives automobile performance data for a few types of cars: (a) During an acceleration of 0 to 60 mph, which car has the largest average net force acting on it? The smallest? (b) During this acceleration, for which car would the average net f

> The position of a training helicopter (weight 2.75 × 105 N) in a test is given by

> A mysterious rocket-propelled object of mass 45.0 kg is initially at rest in the middle of the horizontal, frictionless surface of an ice-covered lake. Then a force directed east and with magnitude F(t) = (16.8 N/s)t is applied. How far does the object t

> You have landed on an unknown planet, Newtonia, and want to know what objects weigh there. When you push a certain tool, starting from rest, on a frictionless horizontal surface with a 12.0-N force, the tool moves 16.0 m in the first 2.00 s. You next obs

> Boxes A and B are connected to each end of a light vertical rope (Fig. P4.49). A constant upward force F = 80.0 N is applied to box A. Starting from rest, box B descends 12.0 m in 4.00 s. The tension in the rope connecting the two boxes is 36.0 N. What a

> The two blocks in Fig. P4.48 are connected by a heavy uniform rope with a mass of 4.00 kg. An upward force of 200 N is applied as shown. (a) Draw three free-body diagrams: one for the 6.00-kg block, one for the 4.00-kg rope, and another one for the 5.00-

> A 75.0-kg man steps off a platform 3.10 m above the ground. He keeps his legs straight as he falls, but his knees begin to bend at the moment his feet touch the ground; treated as a particle, he moves an additional 0.60 m before coming to rest. (a) What

> After an annual checkup, you leave your physician’s office, where you weighed 683 N. You then get into an elevator that, conveniently, has a scale. Find the magnitude and direction of the elevator’s acceleration if the scale reads (a) 725 N and (b) 595 N

> “A ball is thrown from the edge of a high cliff. Regardless of the angle at which it is thrown, due to air resistance, the ball will eventually end up moving vertically downward.” Justify this statement.

> A loaded elevator with very worn cables has a total mass of 2200 kg, and the cables can withstand a maximum tension of 28,000 N. (a) Draw the free-body force diagram for the elevator. In terms of the forces on your diagram, what is the net force on the e

> The froghopper (Philaenus spumarius), the champion leaper of the insect world, has a mass of 12.3 mg and leaves the ground (in the most energetic jumps) at 4.0 m>s from a vertical start. The jump itself lasts a mere 1.0 ms before the insect is clear of t

> A 6.50-kg instrument is hanging by a vertical wire inside a spaceship that is blasting off from rest at the earth’s surface. This spaceship reaches an altitude of 276 m in 15.0 s with constant acceleration. (a) Draw a free-body diagram for the instrument

> To study damage to aircraft that collide with large birds, you design a test gun that will accelerate chicken-sized objects so that their displacement along the gun barrel is given by x =(9.0 × 103 m>s2)t2 –(8.0 × 104 m>s3)t3. The object leaves the end o

> Two blocks connected by a light horizontal rope sit at rest on a horizontal, frictionless surface. Block A has mass 15.0 kg, and block B has mass m. A constant horizontal force F = 60.0 N is applied to block A (Fig. P4.40). In the first 5.00 s after the

> Two crates, one with mass 4.00 kg and the other with mass 6.00 kg, sit on the frictionless surface of a frozen pond, connected by a light rope (Fig. P4.39). A woman wearing golf shoes (for traction) pulls horizontally on the 6.00-kg crate with a force F

> The fastest served tennis ball, served by “Big Bill” Tilden in 1931, was measured at 73.14 m/s. The mass of a tennis ball is 57 g, and the ball, which starts from rest, is typically in contact with the tennis racquet for 30.0 ms. Assuming constant accele

> The fastest pitched baseball was measured at 46 m/s. A typical baseball has a mass of 145 g. If the pitcher exerted his force (assumed to be horizontal and constant) over a distance of 1.0 m, (a) what force did he produce on the ball during this record-s

> An advertisement claims that a particular automobile can “stop on a dime.” What net force would be necessary to stop a 850-kg automobile traveling initially at 45.0 km/h in a distance equal to the diameter of a dime, 1.8 cm?

> Basketball player Darrell Griffith is on record as attaining a standing vertical jump of 1.2 m (4 ft). (This means that he moved upward by 1.2 m after his feet left the floor.) Griffith weighed 890 N (200 lb). (a) What was his speed as he left the floor?

> A nonzero net force acts on an object. Is it possible for any of the following quantities to be constant: the object’s (a) speed; (b) velocity; (c) kinetic energy?

> An oil tanker’s engines have broken down, and the wind is blowing the tanker straight toward a reef at a constant speed of 1.5 m/s (Fig. P4.34). When the tanker is 500 m from the reef, the wind dies down just as the engineer gets the en

> Two adults and a child want to push a wheeled cart in the direction marked x in Fig. P4.33. The two adults push with horizontal forces F S 1 and F S 2 as shown. (a) Find the magnitude and direction of the smallest force that the child should exert. Ignor

> You have just landed on Planet X. You release a 100-g ball from rest from a height of 10.0 m and measure that it takes 3.40 s to reach the ground. Ignore any force on the ball from the atmosphere of the planet. How much does the 100-g ball weigh on the s

> A 5.60-kg bucket of water is accelerated upward by a cord of negligible mass whose breaking strength is 75.0 N. If the bucket starts from rest, what is the minimum time required to raise the bucket a vertical distance of 12.0 m without breaking the cord?

> A large box containing your new computer sits on the bed of your pickup truck. You are stopped at a red light. When the light turns green, you stomp on the gas and the truck accelerates. To your horror, the box starts to slide toward the back of the truc

> A person wearing these shoes stands on a smooth, horizontal rock. She pushes against the ground to begin running. What is the maximum horizontal acceleration she can have without slipping? (a) 0.20g; (b) 0.75g; (c) 0.90g; (d) 1.2g.

> If the person steps onto a smooth rock surface that’s inclined at an angle large enough that these shoes begin to slip, what will happen? (a) She will slide a short distance and stop; (b) she will accelerate down the surface; (c) she will slide down the

> For a person wearing these shoes, what’s the maximum angle (with respect to the horizontal) of a smooth rock that can be walked on without slipping? (a) 42°; (b) 50°; (c) 64°; (d) larger than 90°.

> How many times greater is the kinetic energy of the person when biking than when walking? Ignore the mass of the bike. (a) 1.7; (b) 3; (c) 6; (d) 9.

> Based on the given data, how does the energy used in biking 1 km compare with that used in walking 1 km? Biking takes (a) 1 3 of the energy of walking the same distance; (b) the same energy as walking the same distance; (c) 3 times the energy of walking

> Consider a graph of instantaneous power versus time, with the vertical P-axis starting at P = 0. What is the physical significance of the area under the P-versus-t curve between vertical lines at t1 and t2 ? How could you find the average power from the

> A block rests on an inclined plane with enough friction to prevent it from sliding down. To start the block moving, is it easier to push it up the plane or down the plane? Why?

> Based on the given data, how does the energy used in biking 1 km compare with that used in walking 1 km? Biking takes (a) 1/3 of the energy of walking the same distance; (b) the same energy as walking the same distance; (c) 3 times the energy of walking

> The forces on a dancer can be measured directly when a dancer performs a jump on a force plate that measures the force between her feet and the ground. A graph of force versus time throughout a vertical jump performed on a force plate is shown in Fig. P4

> While the dancer is in the air and holding a fixed pose, what is the magnitude of the force her neck exerts on her head? (a) 0 N; (b) 60 N; (c) 120 N; (d) 180 N.

> What is the magnitude of the average force that her neck exerts on her head during the landing? (a) 0 N; (b) 60 N; (c) 120 N; (d) 180 N.

> To stretch a spring 3.00 cm from its unstretched length, 12.0 J of work must be done. (a) What is the force constant of this spring? (b) What magnitude force is needed to stretch the spring 3.00 cm from its unstretched length? (c) How much work must be d

> A surgeon is using material from a donated heart to repair a patient’s damaged aorta and needs to know the elastic characteristics of this aortal material. Tests performed on a 16.0-cm strip of the donated aorta reveal that it stretches 3.75 cm when a 1.

> A 30.0-kg crate is initially moving with a velocity that has magnitude 3.90 m/s in a direction 37.0o west of north. How much work must be done on the crate to change its velocity to 5.62 m/s in a direction 63.0° south of east?

> A car is traveling on a level road with speed v0 at the instant when the brakes lock, so that the tires slide rather than roll. (a) Use the work–energy theorem to calculate the minimum stopping distance of the car in terms of v0, g, and the coefficient o

> On a farm, you are pushing on a stubborn pig with a constant horizontal force with magnitude 30.0 N and direction 37.0° counterclockwise from the +x-axis. How much work does this force do during a displacement of the pig that is (a)

> You apply a constant force

> A ball is dropped from rest and feels air resistance as it falls. Which of the graphs in Fig. Q5.25 best represents its acceleration as a function of time? Fig. Q5.25: (a) (b) (c) (d) (e)

> A 50.0-kg stunt pilot who has been diving her airplane vertically pulls out of the dive by changing her course to a circle in a vertical plane. (a) If the plane’s speed at the lowest point of the circle is 95.0 m/s, what is the minimum radius of the circ

> A small car with mass 0.800 kg travels at constant speed on the inside of a track that is a vertical circle with radius 5.00 m (Fig. E5.45). If the normal force exerted by the track on the car when it is at the top of the track (point B) is 6.00 N, what

> A small remote-controlled car with mass 1.60 kg moves at a constant speed of v = 12.0 m/s in a track formed by a vertical circle inside a hollow metal cylinder that has a radius of 5.00 m (Fig. E5.45). What is the magnitude of the normal force exerted on

> A 52-kg ice skater spins about a vertical axis through her body with her arms horizontally outstretched; she makes 2.0 turns each second. The distance from one hand to the other is 1.50 m. Biometric measurements indicate that each hand typically makes up

> A stone with mass 0.80 kg is attached to one end of a string 0.90 m long. The string will break if its tension exceeds 60.0 N. The stone is whirled in a horizontal circle on a frictionless tabletop; the other end of the string remains fixed. (a) Draw a f

> (a) In Example 5.18 (Section 5.3), what value of D is required to make vt = 42 m/s for the skydiver? (b) If the skydiver’s daughter, whose mass is 45 kg, is falling through the air and has the same D 10.25 kg/m2 as her father, what is the daughter’s term

> A large crate with mass m rests on a horizontal floor. The coefficients of friction between the crate and the floor are

> You throw a baseball straight upward. The drag force is proportional to v2. In terms of g, what is the y-component of the ball’s acceleration when the ball’s speed is half its terminal speed and (a) it is moving up? (b) It is moving back down?

> As shown in Fig. E5.34, block A (mass 2.25 kg) rests on a tabletop. It is connected by a horizontal cord passing over a light, frictionless pulley to a hanging block B (mass 1.30 kg). The coefficient of kinetic friction between block A and the tabletop i

> A box with mass m is dragged across a level floor with coefficient of kinetic friction mk by a rope that is pulled upward at an angle u above the horizontal with a force of magnitude F. (a) In terms of m, mk, u, and g, obtain an expression for the magnit

> You have two identical tennis balls and fill one with water. You release both balls simultaneously from the top of a tall building. If air resistance is negligible, which ball will strike the ground first? Explain. What if air resistance is not negligibl

> Two crates connected by a rope lie on a horizontal surface (Fig. E5.37). Crate A has mass mA, and crate B has mass mB. The coefficient of kinetic friction between each crate and the surface is mk. The crates are pulled to the right at constant velocity b

> A 25.0-kg box of textbooks rests on a loading ramp that makes an angle a with the horizontal. The coefficient of kinetic friction is 0.25, and the coefficient of static friction is 0.35. (a) As a is increased, find the minimum angle at which the box star

> (a) If the coefficient of kinetic friction between tires and dry pavement is 0.80, what is the shortest distance in which you can stop a car by locking the brakes when the car is traveling at 28.7 m/s (about 65 mi/h)? (b) On wet pavement the coefficient

> Consider the system shown in Fig. E5.34. Block A weighs 45.0 N, and block B weighs 25.0 N. Once block B is set into downward motion, it descends at a constant speed. (a) Calculate the coefficient of kinetic friction between block A and the tabletop. (b)