2.99 See Answer

Question: I think the waiter wrote in an

I think the waiter wrote in an extra $25 tip on my Sun- shine Café bill after I received and signed my credit card receipt,” Mark Otter said to the restaurant manager, Brad Gladiolus. “Mr. Otter, mail me a copy of the restaurant receipt and I’ll investigate,” responded Mr. Gladiolus. “I don’t have the receipt—I lost it—but I have my monthly credit card statement,” replied Mr. Otter. Mr. Gladiolus hesitated, then said, “Mr. Otter, I don’t see any way to investigate your claim, so there’s nothing I can do.” Mr. Gladiolus sat down at his desk and sketched out possible causes of this service upset as follows: • The customer is responsible for adding the bill and tipping properly, writing legibly, retaining the second receipt, and drinking alcohol responsibly. • The employee is responsible for typing the bill in the register/computer correctly, going back to the customer if the tip is unreadable and verifying the correct amount, and being honest.
I think the waiter wrote in an extra $25 tip on my Sun- shine Café bill after I received and signed my credit card receipt,” Mark Otter said to the restaurant manager, Brad Gladiolus. “Mr. Otter, mail me a copy of the restaurant receipt and I’ll investigate,” responded Mr. Gladiolus. “I don’t have the receipt—I lost it—but I have my monthly credit card statement,” replied Mr. Otter. Mr. Gladiolus hesitated, then said, “Mr. Otter, I don’t see any way to investigate your claim, so there’s nothing I can do.”
 Mr. Gladiolus sat down at his desk and sketched out possible causes of this service upset as follows:
• The customer is responsible for adding the bill and tipping properly, writing legibly, retaining the second receipt, and drinking alcohol responsibly.
• The employee is responsible for typing the bill in the register/computer correctly, going back to the customer if the tip is unreadable and verifying the correct amount, and being honest.
• The restaurant manager is responsible for investigating the store’s receipt history and finding this transaction; auditing the source of the error if possible, such as a mistyped decimal or extra zero; and contacting the credit card company and customer to resolve the issue.
• The credit card company, a third-party provider in this value chain, is responsible for providing records of the electronic transaction, helping resolve the issue, and issuing a debit or credit to the customer and/or restaurant if needed.
Company Background Abby Martin’s parents came to Florida from Chicago in the 1960s. Her parents bought land in the Cape Coral area. Later they opened a hotel on Fort Myers Beach, and Abby was part of the housekeeping staff, her first job. By 17, she was running the hotel on her own. Today, she owns and operates six restaurants and a by-the-sea hotel. The restaurants are located in shopping centers next to high-traffic facilities such as movie theaters, groups of retail stores, and other clusters of restaurants. Abby uses four different restaurant concepts (facility décor, size, and layout; prices, menus; music and bands; wine list, lounge areas, etc.) for these six restaurants, depending on the location and local market demographics.
Abby has other investments but loves the challenge of managing restaurants. “I have a great passion for finding a need and meeting it,” she said. “The secret to our restau- rant success is customizing the business to local needs and being very consistent. Offer good food and service at the most reasonable price you can afford. And know that even if you offer all those things you can still fail. The hospitality business is the hardest business, period. You can never sit back and coast.”
In her spare time, she is a prominent community figure involved in activities such as helping build the Ronald McDonald House, fund-raising for the hospital cancer foundation, and serving as chairperson of the local board for the Salvation Army. She likes the Salvation Army because it runs a lean operation, with only six cents spent on management for every one dollar in donations.
Day-to-Day Service Management Sunshine restaurants are normally open seven days a week from 11 a.m. to 10 p.m. Lunch prices are in the $10 to $20 range and include such entrees as a wood-grilled hamburger, seafood salad croissant, and sesame-crusted yellow fin tuna. Dinner prices range from $20 to $30 per person and include dishes such as shrimp and scallop scampi, red snapper picatta, and wood-grilled filet mignon. Each restaurant keeps about 20 to 30 popular wines in stock, such as a Cakebread Chardonnay. Wine, liquor, and some food items are ordered in bulk to take advantage of volume- price discounts and shipped directly from the suppliers to individual restaurants. All other items are ordered by the restaurant chef and general manager for each unique restaurant.
Abby, like most entrepreneurs, has her own approach to quality control. She notes that “I visit my restaurants every few days, and as I walk in I immediately begin to watch customer faces and behaviors. I try to see if they are happy, talking, smiling, and enjoying the food and sur- roundings. I look at their posture and facial expressions. I often talk with customers and ask if everything was to their liking. I ask my employees—waiters, bartenders, kitchen help, managers, and chef—if they have encountered any problems or service breakdowns. I look for untidy floors, tables, and restrooms. I try to learn from negative customer comments or complaints. My employees know that I will try to help them solve any problem—they trust me. I take the pulse of the restaurant in a short visit. I meet weekly with the restaurant chefs. I manage quality by observation and close contact with all of the people in the restaurant. At night I go over the financials and sales data.”
A typical Sunshine restaurant has a core staff of about 12 employees, consisting of a manager, an assistant man- ager, chef, assistant chef, four waiters, two bartenders, and two helpers in the kitchen. During peak season each restaurant hires six to eight additional employees. Peak demand is when the “snow-birds” arrive in southwest Florida from November to April. During peak demand, the populations of Lee and Collier counties double to almost 2 million people.
Abby’s entrepreneurial approach to managing the business results in about one negative customer complaint per 100 customer comments. The complaints are nearly equal in focusing on food or service quality. Contribution to profit and overhead per restaurant is 35 percent. The typical customer averages one visit every two months, and the customer defection rate is in the 5 to 10 percent range, but is difficult to estimate given the seasonal nature of the business.
Long-Term Strategic Issues Abby Martin has established a reputation in southwest Florida for superior service and food quality in her restaurants. She was considering expanding her restaurants to the Tampa and Orlando areas to leverage her expertise and grow the business for the family. She wondered whether she could maintain the proper financial and quality controls with more restaurants and whether to franchise or not. Due to the 2007–2009 credit crunch and high foreclosure rates, there were plenty of commercial properties in good locations for restaurants, and prices were at all-time lows. Abby thought it was now or never in terms of expanding up and down the west coast of Florida. She envisioned as many as 20 Sunshine restaurants in the next five years.
Decisions Abby wondered when she would ever get the time to analyze these issues. It was not easy keeping up with her businesses. She knew that superior, day-to-day food and service quality determines repeat business, so she had to successfully resolve this customer complaint about the waiter adding a $25 tip while trying to plan for the future. She happened to be at her hotel, so she sat down in a beach chair and watched the brilliant colors of a sunset over the Gulf of Mexico. She began to write down a number of questions she had to answer soon.
Case Questions for Discussion:
1. Draw a cause-and-effect diagram for the possible causes of the $25 tip service upset. Select one possible root cause from your diagram, and explain how you would investigate and fix it.
2. What is the average value of a loyal customer (VLC) at Abby’s restaurants (see Chapter 2, Section 2-2b)? What is the best way to increase revenue given your VLC analysis?
3. Critique the current “informal” quality control system. What changes and improvements do you recommend if Sunshine expands to 20 restaurants?
4. What are your short- and long-term recommendations? Explain your rationale for these recommendations.

• The restaurant manager is responsible for investigating the store’s receipt history and finding this transaction; auditing the source of the error if possible, such as a mistyped decimal or extra zero; and contacting the credit card company and customer to resolve the issue. • The credit card company, a third-party provider in this value chain, is responsible for providing records of the electronic transaction, helping resolve the issue, and issuing a debit or credit to the customer and/or restaurant if needed. Company Background Abby Martin’s parents came to Florida from Chicago in the 1960s. Her parents bought land in the Cape Coral area. Later they opened a hotel on Fort Myers Beach, and Abby was part of the housekeeping staff, her first job. By 17, she was running the hotel on her own. Today, she owns and operates six restaurants and a by-the-sea hotel. The restaurants are located in shopping centers next to high-traffic facilities such as movie theaters, groups of retail stores, and other clusters of restaurants. Abby uses four different restaurant concepts (facility décor, size, and layout; prices, menus; music and bands; wine list, lounge areas, etc.) for these six restaurants, depending on the location and local market demographics. Abby has other investments but loves the challenge of managing restaurants. “I have a great passion for finding a need and meeting it,” she said. “The secret to our restau- rant success is customizing the business to local needs and being very consistent. Offer good food and service at the most reasonable price you can afford. And know that even if you offer all those things you can still fail. The hospitality business is the hardest business, period. You can never sit back and coast.” In her spare time, she is a prominent community figure involved in activities such as helping build the Ronald McDonald House, fund-raising for the hospital cancer foundation, and serving as chairperson of the local board for the Salvation Army. She likes the Salvation Army because it runs a lean operation, with only six cents spent on management for every one dollar in donations. Day-to-Day Service Management Sunshine restaurants are normally open seven days a week from 11 a.m. to 10 p.m. Lunch prices are in the $10 to $20 range and include such entrees as a wood-grilled hamburger, seafood salad croissant, and sesame-crusted yellow fin tuna. Dinner prices range from $20 to $30 per person and include dishes such as shrimp and scallop scampi, red snapper picatta, and wood-grilled filet mignon. Each restaurant keeps about 20 to 30 popular wines in stock, such as a Cakebread Chardonnay. Wine, liquor, and some food items are ordered in bulk to take advantage of volume- price discounts and shipped directly from the suppliers to individual restaurants. All other items are ordered by the restaurant chef and general manager for each unique restaurant. Abby, like most entrepreneurs, has her own approach to quality control. She notes that “I visit my restaurants every few days, and as I walk in I immediately begin to watch customer faces and behaviors. I try to see if they are happy, talking, smiling, and enjoying the food and sur- roundings. I look at their posture and facial expressions. I often talk with customers and ask if everything was to their liking. I ask my employees—waiters, bartenders, kitchen help, managers, and chef—if they have encountered any problems or service breakdowns. I look for untidy floors, tables, and restrooms. I try to learn from negative customer comments or complaints. My employees know that I will try to help them solve any problem—they trust me. I take the pulse of the restaurant in a short visit. I meet weekly with the restaurant chefs. I manage quality by observation and close contact with all of the people in the restaurant. At night I go over the financials and sales data.” A typical Sunshine restaurant has a core staff of about 12 employees, consisting of a manager, an assistant man- ager, chef, assistant chef, four waiters, two bartenders, and two helpers in the kitchen. During peak season each restaurant hires six to eight additional employees. Peak demand is when the “snow-birds” arrive in southwest Florida from November to April. During peak demand, the populations of Lee and Collier counties double to almost 2 million people. Abby’s entrepreneurial approach to managing the business results in about one negative customer complaint per 100 customer comments. The complaints are nearly equal in focusing on food or service quality. Contribution to profit and overhead per restaurant is 35 percent. The typical customer averages one visit every two months, and the customer defection rate is in the 5 to 10 percent range, but is difficult to estimate given the seasonal nature of the business. Long-Term Strategic Issues Abby Martin has established a reputation in southwest Florida for superior service and food quality in her restaurants. She was considering expanding her restaurants to the Tampa and Orlando areas to leverage her expertise and grow the business for the family. She wondered whether she could maintain the proper financial and quality controls with more restaurants and whether to franchise or not. Due to the 2007–2009 credit crunch and high foreclosure rates, there were plenty of commercial properties in good locations for restaurants, and prices were at all-time lows. Abby thought it was now or never in terms of expanding up and down the west coast of Florida. She envisioned as many as 20 Sunshine restaurants in the next five years. Decisions Abby wondered when she would ever get the time to analyze these issues. It was not easy keeping up with her businesses. She knew that superior, day-to-day food and service quality determines repeat business, so she had to successfully resolve this customer complaint about the waiter adding a $25 tip while trying to plan for the future. She happened to be at her hotel, so she sat down in a beach chair and watched the brilliant colors of a sunset over the Gulf of Mexico. She began to write down a number of questions she had to answer soon. Case Questions for Discussion: 1. Draw a cause-and-effect diagram for the possible causes of the $25 tip service upset. Select one possible root cause from your diagram, and explain how you would investigate and fix it. 2. What is the average value of a loyal customer (VLC) at Abby’s restaurants (see Chapter 2, Section 2-2b)? What is the best way to increase revenue given your VLC analysis? 3. Critique the current “informal” quality control system. What changes and improvements do you recommend if Sunshine expands to 20 restaurants? 4. What are your short- and long-term recommendations? Explain your rationale for these recommendations.


> What is a third-party logistics (3PL) provider? How does Amazon use 3PL providers?

> What is a contract manufacturer? Provide some examples of contract manufacturers used by Apple.

> Describe the ideas of vertical, forward, and backward integration.

> Define push and pull supply chains and explain how they differ.

> Define efficient and responsive supply chains and explain how they differ.

> Discuss scheduling and sequencing issues in municipal services such as garbage collection, school-bus routing, or snowplowing. What types of criteria and approaches might be used?

> Define operational structure and provide an example of centralized control and decentralized control.

> Explain supply chain optimization and how the transportation model can be used to help optimize costs in supply chains.

> Identify and explain the four EPIC dimensions to help location facilities around the world.

> For the in-line skate assembly example in this chapter, suppose the times for the individual operations are as follows: Assume that inspections cannot be performed by production personnel, but only by persons from quality control. Therefore, assembly ope

> Explain how the center of gravity method works.

> Explain the types of decisions required and criteria used to locate facilities in supply chains.

> Define multisite management and provide one example of a company that must handle this challenge.

> Describe how Inditex/Zara designs and operates its supply chain.

> Explain the concept of a global supply chain and describe the key design decisions.

> What is the rationale for product and process simplification?

> How does your college or university schedule classes? What criteria are used?

> Describe how design for manufacturability (DFM) and design for sustainability are used for designing manufactured goods.

> Describe how reliability is used for designing manufactured goods.

> Describe how the Taguchi loss function is used for designing manufactured goods.

> Describe the goal-post view of conforming to specifications.

> To make one particular model of a personal digital assistant (PDA) on an assembly line, the work content is defined by the ten tasks below. a. Draw the precedence diagram for this assembly line. b. What is the cycle time if you want to produce 4,500 PDAs

> Explain the concept and application of quality function deployment.

> What is prototype testing? Why is it used?

> What are the six major steps in designing goods and services?

> Explain how goods and service design concepts are integrated at LensCrafters.

> Define a service upset and provide one example from your personal experiences.

> Discuss how you decide to schedule your school assignments. Do your informal scheduling rules correspond to any of those in this chapter?

> Define a service guarantee and provide one example.

> Describe the four elements of service-encounter design.

> Define high- and low-contact systems and provide examples of each.

> What is customer contact?

> Explain the five elements of service-delivery system design.

> For the assembly line described in problem 39, how would the line be balanced by choosing the assignable task having the shortest task time first?

> Explain the importance of new product design and development.

> Explain the concept of scalability. Identify one low and one highly scalable organization and explain why you categorize them as such.

> Explain the benefits and challenges of using technology.

> What types of technology might a major hotel chain use to enhance the customer experience?

> How should managers choose an appropriate lot-sizing rule? Should they be chosen strictly on an economic basis, or should intangible factors be considered. Why?

> What is CRM? How does it help OM do its job?

> Explain how manufacturing and service technology strengthen the value chain.

> What is 3-D printing? Provide two examples.

> What is CAD/CAE? Provide one non-textbook example.

> Define hard and soft technology and give an example.

> How can break-even analysis help managers make decisions? Explain how the break-even point is found.

> A small assembly line for the assembly of power steering pumps needs to be balanced. Exhibit 8.14 is the precedence diagram. The cycle time is determined to be 1.5 minutes. How would the line be balanced by choosing the assignable task having the longes

> How can decision analysis be used in making technology decisions?

> Describe different types of technology and their role in manufacturing and service operations

> Define strategy. Explain how corporate, business, and functional strategies support overall strategy.

> What is innovation? Provide two examples from well-known companies.

> Define mass customization and provide two examples.

> What are the five competitive priorities? Cite an example of an organization that demonstrates the competitive priority.

> Describe how customers evaluate goods and services.

> Define search, experience, and credence attributes, and provide an example of each.

> Explain approaches for understanding customer wants and needs.

> Define order qualifiers and order winners.

> In problem 37, suppose the line is balanced using 14 workstations and a finished product can be produced every 4.5 minutes. a. What is the production rate in units per day? b. What is the assembly line efficiency?

> Provide three examples of McDonald’s management making choices on sustainability. (See Exhibit 1.13 in Chapter 1.)

> How would you rank McDonald’s competitive priorities in Exhibit 3.6?

> How do the concepts of master production scheduling and material requirements planning translate to a service organization? Provide an example.

> How does Dr. Hill’s strategy framework tie corporate strategy to marketing and operations strategy?

> Describe Hill’s framework for operations strategy.

> Explain the role of OM, sustainability, and operations in strategic planning.

> What is operations strategy? How can it support competitive priorities?

> Provide some examples of core competencies, and explain the value to an organization of understanding its core competencies.

> Explain how organizations seek to gain competitive advantage.

> Define innovation and learning.

> Define goods and service design flexibility and volume flexibility.

> An assembly line with 30 activities is to be balanced. The total amount of time to complete all 30 activities is 60 minutes. The longest activity takes 2.4 minutes and the shortest takes 0.3 minutes. The line will operate for 480 minutes per day. a. What

> The performance measure “time” relates to what two performance dimensions?

> Construct a BOM for your college curriculum, thinking of core courses, electives, and so on as components of the end item. How might MRP concepts apply?

> Define service upsets and give an example from personal experience.

> What are five dimensions of service quality?

> Define goods quality and service quality.

> What is a customer-satisfaction system?

> What are the eight performance measure categories for organizations?

> What is the primary theory of the service-profit chain model of organizational performance?

> What are example performance metrics for suppliers, value-creation processes, and customers in the value chain model of organizational performance?

> What are the four performance categories of the balanced scorecard approach to performance measurement?

> Explain the Baldrige Model of Organizational Performance.

> Use the activities and precedence relations in Exhibit 8.13 to do the following: a. Draw a precedence diagram for this assembly line. b. Balance the assembly line for an eight-hour-shift output of 30 pieces. c. Determine maximum and minimum cycle times.

> Draw a simple bill-of-materials (BOM) for an automobile given the following requirements: (a) clearly label the end item and each component, (b) the BOM must contain no more than ten items, (c) the BOM must contain at least three levels (you may count

> Research and write a short paper (two pages maximum) on how an organization has applied the TOC.

> Define actionable measures.

> What are some of the questions IBM uses to evaluate performance measures?

> How are the customer defection and customer retention rate related?

> Define the value of a loyal customer. Why is it important?

> Define interlinking. Why is it important?

> Define productivity and operational efficiency.

> Define measurement briefly.

> What are the implications of Marriott’s quote “Happy employees create happy customers”? What does this mean for human resource management?

> Select one of the following challenges facing OM: customers, technology, workforce, globalization, sustainability, or optimizing supply chains, and explain its short- and long-term impact.

> Summarize the historical development of OM.

> Interview a production manager at a nearby goods- producing company to determine how the company plans its production for fluctuating demand. What approaches does the company use?

> Bass Fishing, Inc. assembles fishing nets with aluminum handles in an assembly line using four workstations. Management wants an output rate of 200 nets per day using a 7.5-hour workday. The sum of the task times is 7.00 minutes/net. a. What is the c

> Describe the importance of data and business analytics in operations and supply chain management?

> What percent of U.S. economy jobs are in the service sector?

> Define sustainability and explain its three dimensions.

> Contrast the three different frameworks for describing value chains.

> What is a distribution center?

2.99

See Answer