Question: Jamison Auto Parts produces replacement parts for

> Jordan Sports Inc. has labor costs and overhead totaling $2.6 million during a given period. The company purchased $10.5 million of materials during the period and used $10 million of this amount. What is the amount of total manufacturing cost for the pe

> The XYZ Manufacturing Company produces two products, S-101 and C-110. You have obtained the following information regarding the annual manufacturing support (i.e., factory overhead) costs associated with the manufacturing process used to produce these tw

> Alden Company uses a three-variance analysis for factory overhead variances. Practical capacity is defined as 32 setups and 32,000 machine hours to manufacture 6,400 units for the year. Selected data for 2022 follow: Required: 1. Compute (a) the total

> Refer to the information for Johnny Lee, Inc., in Exercise 15-24. Assume that in a given month (December) the standard allowed machine hours for output produced was 5,500. Also, assume that the denominator activity level for setting the predetermined ove

> Walkenhorst Company’s machining department prepared its 2022 budget based on the following data: Practical capacity ……………………………………….. 40,000 units Standard machine hours per unit ………………………………….. 2 Standard variable factory overhead . $3.00 per machine h

> (Continuation of Exercises 15-29 and 15-30) The Platter Valley factory of Bybee Industries uses a two-variance analysis of the total factory overhead variance. Required: 1. Use the data given in Exercises 15-29 and 15-30 to compute the total flexible bu

> (Continuation of Exercises 15-29 and 15-30) The Platter Valley factory of Bybee Industries currently uses a four-variance analysis of the total factory overhead cost variance but is thinking of changing to a three-variance analysis. Required: 1. Use the

> For March, the Platter Valley factory of Bybee Industries budgeted $90,000 for fixed factory overhead cost. Its practical capacity is 2,500 direct labor hours per month (to manufacture 5,000 pairs of boots). The factory used 2,700 direct labor hours in M

> The Platter Valley factory of Bybee Industries manufactures field boots. The cost of each boot includes direct materials, direct labor, and manufacturing (factory) overhead. The firm traces all direct costs to products, and it assigns overhead cost to pr

> Clark Company’s master budget includes $360,000 for equipment depreciation. The master budget was prepared for an annual volume of 120,000 chargeable hours. This volume is expected to occur uniformly throughout the year. During September, Clark performed

> Overhead information for Cran-Mar Company for October follows: Total factory overhead cost incurred ………………………………….. $30,000 Budgeted fixed factory overhead cost …………………………………… $ 7,125 Total standard overhead rate per machine hour (MH) …………… $ 4.90 Stand

> Womble Inc. has beginning inventory of $200 and an ending inventory of $400 for a given period in which it purchased $13,400 worth of materials. What is the dollar amount of materials used in this period?

> The controller is satisfied with the graphical representation you prepared in conjunction with Exercise 15-25. She thinks that this graphical representation of variable overhead standard cost variances will be well received by operating managers of the c

> You are in charge of making a presentation to operating managers regarding the meaning of the total overhead variance that appears each month on their performance reports. The controller suggested that a graphical presentation might be an effective way t

> Johnny Lee, Inc., produces a line of small gasoline-powered engines that can be used in a variety of residential machines, ranging from different types of lawnmowers, to snowblowers, to garden tools (such as tillers and weed-wackers). The basic product l

> Zodiac Sound Co. manufactures audio systems, both made-to-order and mass-produced systems, that are typically sold to large-scale manufacturers of electronics equipment. For competitive reasons, the company is trying to increase its manufacturing cycle e

> This chapter deals with the design of effective control systems associated with business processes, including operating processes. As indicated in the text, a comprehensive management accounting and control system will have both financial indicators and

> Chen Inc. produces a line of soy-based products, including a premium soy milk that comes in different flavors. This company, founded by Alan Chen, has been doing business in the United States for the past 15 years. In the face of competition associated w

> As indicated in the text, both financial and nonfinancial performance indicators play important roles in an organization’s overall operational control system. Explain, concisely, the relative advantage of each type of performance indicator. That is, what

> Steinberg Company had the following direct materials costs for the manufacturing of product T in March: Actual purchase price per pound of direct materials …………………………………………… $7.50 Standard direct materials allowed for units of product T produced …………… 2

> Boron Chemical Company produces a synthetic resin that is used in the automotive industry. The company uses a standard cost system. For each gallon of output, the following direct manufacturing costs are anticipated: Direct labor: 2 hours at $25.00 per

> Use the data in Exhibit 14.5. On October 7, Schmidt Machinery Company purchased 720 pounds of PVC at $41.00 per pound. On October 9, Schmidt’s production department used 720 pounds of PVC for the 780 units of XV-1 it manufactured. Requ

> Which of the following is the correct sequence in which cost management information is developed and used? a. Business events, data, information, analysis, decisions b. Business events, data, analysis, information, decisions c. Business events, informati

> You have been assigned to a strategic leadership committee that has been charged by the CEO with developing and implementing a comprehensive management accounting and control system. At the first planning session that you attended, the subject of financi

> Ohio Apple Orchards Inc. (OAO) produces an organic, super-premium apple juice that it markets to specialty food outlets. OAO purchases its apples from a select group of farmers located in the Midwest. Recently, a graduate of the local university, Susanna

> A number of ethical issues arise in the design of management control systems. For example, such issues might arise when an individual’s performance relative to budget or standard cost affects the individual’s compensation or reward. Assume you are the ma

> Agrichem manufactures Insect-Be-Gone. Each bag of the product contains 60 pounds of direct materials. Twenty-five percent of the materials evaporate during manufacturing. The budget allows the direct materials to be purchased at $2.50 per pound (gross co

> Portfolio management is a powerful concept in finance and marketing. The marketing application of the concept is to develop and manage a balanced portfolio of products. Market share and market growth can be used to classify products for portfolio purpose

> RTI Company’s master budget calls for production and sale of 18,000 units for $81,000, variable costs of $30,600, and fixed costs of $20,000. During the most recent period, the company incurred $32,000 of variable costs to produce and sell 20,000 units f

> At a recent seminar you attended, the invited speaker was discussing some of the advantages and disadvantages of standard costs in terms of evaluating performance and motivating goal-congruent behavior on the part of employees. One criticism of standard

> Crane Corporation’s master budget for the year is shown below: Required: 1. During the year, the company manufactured and sold 55,000 units of product. Prepare an Excel spreadsheet that contains a flexible budget for this level of out

> Information regarding Maxwell’s direct labor cost for the month of January follows: Direct labor hourly rate paid ……………………………………………………………….. $28.50 Total standard direct labor hours for units produced this period ……………… 11,000 Direct labor hours actuall

> DES Company manufactures folding chairs. Direct materials include hard plastic for the seat and back and metal beams for the legs. The standard cost sheet for a single chair includes the following direct materials information: Last month, DES purchased

> The IMA definition of management accounting states that a. management accounting is the process of gathering, reporting, and analyzing information for management decision making. b. management accounting is a profession that involves preparation and anal

> List the four functions of management. Explain what type of cost management information is appropriate for each.

> Assume that Schmidt Machinery Company had the standard costs reflected in Exhibit 14.5. In a given month, the company used 3,450 pounds of aluminum to manufacture 920 units. The company paid $28.50 per pound during the month to purchase aluminum. At the

> Assume that in October 2022 the Schmidt Machinery Company (Exhibit 14.1) manufactured and sold 950 units for $835 each. During this month, the company incurred $475,000 total variable costs and $180,000 total fixed costs. The master budget data for the m

> As the new accountant for Cohen & Co., you have been asked to provide a succinct analysis of financial performance for the year just ended. You obtain the following information that pertains to the company’s sole product: Required

> The following information is available for Brownstone Products Required: 1. What was the master budget variance for July, rounded to the nearest whole dollar? Was this variance favorable or unfavorable? 2. Set up a spreadsheet to compute the July sales

> Matt Simpson owns and operates Quality Craft Rentals, which offers canoe rentals and shuttle service on the Nantahala River. Customers can rent canoes at one station, enter the river there, and exit at one of two designated locations to catch a shuttle t

> The Pentagon is constantly seeking ways to procure the most effective combat equipment and systems at the lowest possible cost. A key element in most procurement contracts is a fixed fee based on a percentage of the full cost for the contract plus a perc

> Williams Inc. produces a single product, a part used in the manufacture of automobile transmissions. Known for its quality and performance, the part is sold to luxury auto manufacturers around the world. Because this is a quality product, Williams has so

> The use of ratios and trends to assess the performance of a company is called: a. Business analysis. b. Financial analysis. c. Business valuation. d. Market valuation.

> Tinsley Inc. is an industry-leading cardboard manufacturer. You have been asked to determine a market value for the firm’s equity. The firm has 100,000 shares outstanding, earnings per share of $2.50 last year, and a stock price of $25. What is the marke

> Sticky Fingers Inc. produces packing and masking tape. Last year’s annual report has been compiled, and you are in charge of business analysis for the year. The company had a goal for inventory turnover of 6 for last year. The actual results were cost of

> Assume the following for Round Top Inc. for the current fiscal year. Round Top applies overhead on the basis of units produced. Budgeted overhead ……………………………………. $350,000 Actual overhead ……………………………………….. $360,000 Actual labor hours ………………………………………… 22,

> Johnson Healthcare is a health care firm specializing in products for persons who are disabled. Johnson plans to maintain a 10% gross profit margin. After analyzing last year’s data, you found that Johnson had gross profit of $250,000 and net sales of $1

> Smith Co. is a firm specializing in financial advice for retired individuals. After some analysis, you have determined that an earnings multiplier of 7 is appropriate for this type of business. Smith’s most recent earnings totaled $250,000, and earnings

> Moore Heel is a shoe manufacturing company. Moore has hired you to value the company based on the discounted cash flow method. You have determined that the present value of the company’s cash flows is $400,000, marketable securities total $150,000, and t

> From a tax avoidance viewpoint, the best type of compensation is: a. Salary: current deduction for firm and currently taxed to employee. b. Deferred bonus: deferred tax for company, deferred deduction to employee. c. Dividends: never taxed to firm or to

> Which of the following is not one of the three key objectives of management compensation? a. To motivate managers to work hard. b. To reduce the taxes of the firm and the employee. c. To provide an incentive for managers to make decisions that are in the

> Felton Co. produces rubber bands for commercial and home use. Felton reported $1 million residual income (RI) with $20 million net book value (NBV) of assets and $5 million in operating income for the year. What was the required rate of return?

> Tinsley Plastics manufactures plastic bottles used for beverages and household cleaners. The average net book value (NBV) of assets during the quarter is estimated as $500,000. If the required rate of return is 10% on average assets and the firm wants to

> Foreman Publishing Company’s income for the most recent quarter was $500,000, and the average net book value (NBV) of assets during the quarter was $1.5 million. If the company has a required rate of return of 15% on investment, what was the residual inc

> Using the data from Brief Exercise 19-16, compute King Mattresses’s total return on sales (ROS) for the quarter. Brief Exercise 19-16: King Mattresses sells both mattress sets and bed frames. Last quarter, total sales were $50,000 for mattress sets and

> Assume the following for White Top Inc. for the current fiscal year. White Top applies overhead on the basis of units produced. Budgeted overhead ………………………………………..… $200,000 Actual overhead ………………………………………………. $222,000 Actual labor hours ………………………………………

> King Mattresses sells both mattress sets and bed frames. Last quarter, total sales were $50,000 for mattress sets and $25,000 for bed frames. Return on investment (ROI) was 10% for both divisions, while asset turnover (AT) was 5 for mattress sets and 2 f

> Moore Money is a financial services firm specializing in fixed-income investments. You have been asked by the accounting manager to analyze the company’s financial data from the last quarter. You find the firm had return on investment (ROI) of 15% and as

> Matthews Produce harvests and sells Florida oranges. Matthews has hired you to determine its return on investment (ROI) based on both net book value (NBV) and gross book value (GBV). Financial data for the company show that profits are $2 million, the NB

> Scott Healthcare provides a walk-in clinic for its patients and a pharmacy for any medication prescribed by the doctor. Last year, Scott generated total sales of $500,000 and $100,000 in profits. Scott also had average assets of $250,000 for the year. Wh

> Williams Manufacturing uses scrap metal to produce various tools, such as drill bits, hammer heads, saw blades, and nails. The CEO has asked you to analyze the saw blades division to determine asset turnover for last quarter. You find that the saw blades

> Smith Branded Apparel designs T-shirts for businesses and corporations. The accounting manager has presented the latest quarter’s return on sales of 10% and asset turnover of 1.5. What is the company’s current return on investment (ROI)?

> Meargia Plastics is evaluating its plastic bottles division. The accounting manager has come up with the following data for the year: contribution margin of $500,000, controllable fixed costs of $200,000, and noncontrollable fixed costs of $50,000. Requ

> Manuel Inc. produces textiles in many different forms. After recording lower-than-anticipated profits last year, Manuel has decided to shut down one of its divisions that is not performing well. The accounting manager has compiled the following data on t

> Phelps Glass Inc. has reported the following financial data: net revenues of $10 million, variable costs of $5 million, controllable fixed costs of $2 million, noncontrollable fixed costs of $1 million, and nontraceable costs of $500,000. Required: 1. W

> Calabria Healthcare supplies prescription drugs to pharmacies. As the management accountant, you are required to analyze the financial statements for this quarter. You already have analyzed the company’s two divisions, Name Brand and Generic, and your su

> Some firms pool overhead into a single plantwide overhead pool, while others accumulate overhead costs into manufacturing departments, each of which has an overhead cost pool and overhead cost application rate. Which approach is likely to provide more ac

> Pepper’s Automotive (see Brief Exercise 18-19) has further analyzed the exhaust system division into three products: exhaust pipes, intake valves, and intake pipes. The income statement is available below. Required: 1. What would be t

> Pepper’s Automotive produces auto parts for various automotive retailers. Pepper’s is evaluating the exhaust system division of the company and has come up with the following data for the year: net revenues are $1,000,000, variable costs are $300,000, an

> Colleen Stevens is the North Carolina senior account manager for a national medical equipment manufacturer. Colleen has overall responsibility for the Southeast sales division. The division employs approximately eight sales representatives. Colleen’s rep

> An internationally known food processing company has acquired a mineral mining company. The decision to acquire the mining company is considered strategic based on the anticipated growing demand for the minerals used to create the packages for the compan

> Which of the following is a primary motivation for using a value-stream income statement? a. To measure the financial benefits of a firm’s progress in implementing lean manufacturing b. To identify the existence of poor-quality outputs or processes c. To

> A cause-and-effect (i.e, “fish-bone” or “Ishikawa”) diagram is most helpful for which of the following? a. Estimating nonlinear cost functions b. Diagnostic purposes (i.e., guiding corrective action once poor-quality outputs have been determined) c. Dete

> Part of the process of managing and controlling quality consists of detecting poor quality and then taking appropriate corrective action. Which of the following is not a mechanism that management would typically use to detect poor quality outputs? a. His

> Which of the following is not a characteristic of nonfinancial performance quality indicators? a. They relate to physical processes and therefore focus attention on precise problem areas in need of attention. b. They can provide immediate feedback on whe

> Total customer-response time (CRT) can be defined as which of the following? (Hint: Refer to text Exhibit 14.14 and the accompanying discussion.) a. The difference between when a customer’s order is set up and when the order is finished b. The elapsed ti

> Which of the following costs is not a desirable characteristic of a COQ reporting system? a. Exclusion of opportunity costs in the COQ report b. Comparison of quality costs to some baseline amount for the period c. Use of activity-based cost data to esti

> If the overhead rate is $10 per machine hour and there are 20 labor hours, 16 machine hours, and two personnel on the job, how much overhead should be applied to the job?

> Which of the following costs is not properly characterized as an external failure cost under a COQ reporting system? a. Sales returns and allowances b. Lost contribution due to increased demand on constrained resources c. Lost sales and customer ill-will

> Which of the following costs is not properly characterized as a prevention cost under a COQ reporting system? a. Quality training costs b. Supplier assurance costs c. Testing and inspection costs d. Equipment maintenance costs

> Which of the following statements regarding cost of quality (COQ) reporting is correct? a. Total COQ consists of conformance costs plus nonconformance costs. b. Total COQ consists of conformance costs plus appraisal costs. c. A typical COQ report include

> A Taguchi quality loss function (QLF) a. is used to define the tolerance range in the goalpost quality approach to setting quality standards. b. predicts decreasing quality-related costs as deviations from targeted quality increases. c. would show a doub

> Which of the following is a distinguishing characteristic of using absolute quality conformance for setting quality expectations? a. The ability to incorporate Taguchi quality loss functions b. The use of the DMAIC (define, measure, analyze, improve, and

> Which of the following is a distinguishing characteristic of using goalpost conformance for setting quality expectations? a. The use of Six Sigma performance standards b. The use of the DMAIC (define, measure, analyze, improve, and control) problem-solvi

> “Total perceived quality” (i.e., total customer satisfaction with a product or service) can be defined as the difference between a. “design specifications” and “customer expectations.” b. “customer expectations” and “performance quality.” c. “performance

> Which of the following would not be a desirable outcome from an organization’s investments in quality? a. An increase in the sales return rate b. A decrease in warranty and service-related costs c. Higher product/service selling prices d. Reduced manufac

> Which of the following would not typically be associated with improved quality of a manufacturer’s output? a. Reduced manufacturing cost b. Higher levels of inventory holdings c. Faster throughput times d. Higher selling prices and increased revenues

> For a typical order, assume the following times (in hours): storage time (in between processes), 5.0; inspection time, 1.0; move time (from process to process), 2.0; and manufacturing (processing) time, 8.0. Given this information, what is the manufactur

> Nieto Machine Shop budgeted 4,000 labor hours and 8,000 machine hours used in May. Total budgeted overhead for May is $80,000. What is the overhead rate using labor hours and also using machine hours? Which would you pick and why?

> On average, the manufacturing (processing) time spent per order is approximately 4 days. In addition, a typical order spends 4 days moving from process to process, 3 days in storage, and 2 days in inspection. For an average order, what is the manufacturi

> A customer places an order on January 1. Ten days later, that order is received by the manufacturing department. Fifteen days later, the order is put into production. Processing (manufacturing) time is 20 days for this order. The completed order is then

> A customer’s order is delivered (received by the customer) on December 1, 2022. This order was placed with the company on September 1, 2022, and received by the manufacturing department on September 15, 2022. Actual production on the order began on Octob

> 17. In 2023, a manufacturing company instituted a total quality management (TQM) program producing the comparative report shown below: On the basis of this report, which one of the following statements is most likely correct? a. An increase in conforma

> Listed below are selected items from the cost of quality (COQ) report for Watson Products for last month: Category …………………………………………. Amount Rework ……………………………………………….. $ 725 Equipment maintenance ……………………….. 1,154 Product testing ………………………………………. 786 Fi

> Refer to the information in Brief Exercise 17-13. What is the expected average loss (cost) per unit, E(L(x)), based on a Taguchi quality loss function (QLF), if the manufacturing process is centered on the target specification with a standard deviation (

> Refer to the information in Brief Exercise 17-13. Calculate the estimated total quality loss (cost) when the measured quality characteristic, x (e.g., circumference, measured in inches), is 78. Round your answer to the nearest whole number. Brief Exerci

> Solidtronic Inc., an original equipment manufacturer (OEM), has a product specification of 75 ± 5 (i.e., T [the target value] = 75). The cost for warranty services (when the quality characteristic, x, is either 70 or 80) is estimated as $500 per unit. Wh

> Assume that a plasma TV company is working at a 3-sigma level of quality in terms of each of 100 component parts in each TV it manufactures. Because of the high price associated with these TV sets, the company defines a product defect as any unit with on

> Use the following information. McCall sells a gold-plated souvenir mug; McCall expects to sell 1,600 units for $45 each to earn a $25 contribution margin per unit. Janice McCall, president, expects the year’s total market to be 32,000 units. For the year

> A small consulting firm has an overhead rate of 200% of direct labor charged to each job. The materials cost (including travel and other direct costs) for a particular job is $10,000, and the direct labor is $20,000. What is the total job cost for this j