Question: Randolph Company’s product mix has become
Randolph Company’s product mix has become more diverse over the past few years. Consequently the company undertook an activity-based costing initiative to develop accurate costs for production, as well as marketing, selling, distribution, and administration. The company set list prices that would provide a profit regardless of whether the customer orders were complex or routine. Nevertheless, profits have been falling. The company’s management team decided to examine discounts that had been granted to determine whether these are the reason for poor profit performance.
Management was surprised to learn that customers were taking advantage of a large number of possible discounts or allowances, including the following:
The management team believed that some discounting was necessary to acquire and retain large customers. On deeper investigation, they learned that some of their smaller customers, who were often the most cost conscious, took advantage of every discount or allowance offered. To compare discounts or allowances taken, they compared Customer 1 and Customer 2.
Customer 1 is a long-time customer with sales of $200,000 at list prices. This customer takes advantage of each discount or allowance listed in the preceding table. Moreover, this customer has been a loyal customer since Randolph Company’s inception. In appreciation, Randolph’s sales representative offers free freight, which amounts to 3% of the customer’s list-price purchases from Randolph.
Customer 2 is a more recently acquired customer with sales of $1,000,000 at list prices. This customer only takes advantage of items 1, 3, and 5 in the preceding table.
Required
(a) Compute the total sales discount percentage for Customer 1 and for Customer 2.
(b) Why might Randolph Company’s management team have been unaware of the potentially large total discounts offered to its customers?
(c) What advice do you have for Randolph Company regarding managing its discounts and allowances?
Transcribed Image Text:
1. Volume discount if 20 or more units are ordered 2. Pay in full in 15 days 3. Cooperative advertising allowance for featuring the company's products in its advertisements 4. Take a large shipment before the end of the quarter in advance of an expected seasonal increase in demand 5. Online ordering discount 6. Rebate on sales during specific promotional periods 2% 3% 4% 5% 2% 2%
> Walker Brothers Company is considering the installation of a JIT manufacturing system in the hope that it will improve the company’s overall processing cycle efficiency. Data from the traditional system and estimates for the JIT system
> Consider an organization that has empowered its employees, asking them to improve the quality, productivity, and responsiveness of their processes that involve repetitive work. This work could arise in a manufacturing setting, such as assembling cars or
> To facilitate a move toward JIT production, AB Company is considering a change in its plant layout. The plant controller, Anita Bentley, has been asked to evaluate the costs and benefits of the change in plant layout. After meeting with production and ma
> Discuss the similarities and differences between activity based costing and the theory of constraints, as well as situations in which one approach might be preferable to the other.
> Assume that you are an average student who has a desire to be one of the best students in class. Your professor suggests that you benchmark the working habits of the best student in the class. You are somewhat skeptical but decide to take on the challeng
> Your organization, located in Worthington, Ohio, is contemplating introducing kaizen costing to help with cost reduction. As someone who has an understanding of management accounting, you have been asked for your opinion. Specifically, some of your colle
> Many companies are interested in adopting a kaizen costing approach to reducing costs. However, they are not sure how their current standard costing system will fit with the kaizen costing approach. Required How do the standard costing system and the ka
> As a manager asked to benchmark another organization’s mobile web experience provided to users, on what factors would you gather information? Why?
> What are the key factors in identifying benchmarking partners? Explain why these factors are important.
> Kaizen costing is a method that many Japanese companies have found effective in reducing costs. Required (a) What are the biggest problems in using kaizen costing? (b) How can managers overcome these problems?
> What factors differentiate kaizen costing from standard costing?
> The following data have just been gathered on last year’s quality-related costs at the Ideal Company: Total sales last year were $75,000,000. Required (a) Prepare a cost-of-quality report grouping costs into prevention, appraisal, int
> In which stage of the total life cycle of a product is target costing most applicable?
> What is an investment center?
> The following information shows last year’s quality-related costs for the Madrigal Company: Total sales for the year were $120,000,000. Required (a) Prepare a cost-of-quality report grouping costs into prevention, appraisal, internal
> Managers concerned with improving quality sometimes have a difficult balancing act, given the four types of quality costs they have to manage. As a new manager, you are trying to figure out a strategy for managing $2 million of quality costs; your total
> Read “Everyone Likes to Laud Serving the Customer; Doing It Is the Problem,” by Carol Hymowitz (Wall Street Journal, February 27, 2006, p. B1). Required (a) According to the article, what measures are commonly used to evaluate customer service represent
> Of the four quality costing categories, which quality cost is the most damaging to the organization? Explain.
> Regarding the quality costing categories, how do prevention costs differ from appraisal costs? How do internal failure costs differ from external failure costs?
> How would you classify the layout of a large grocery store? Why do you think it is laid out this way? Can you think of any way to improve the layout of a conventional grocery store? Explain your reasoning. (Hint: Think about JIT, cycle time, and so on.)
> SMY Corporation produces 60,000 videophones per year. The company estimates its direct material costs for the videophone to be $300 per unit and its conversion (direct labor plus support) costs to be $400 per unit. Annual inventory carrying costs, not in
> Boris Company introduced JIT manufacturing last year and has prepared the following data to assess the benefits from the change: Inventory financing costs are 12% per year. Support costs are based on a time-driven activity-based costing analysis. Estima
> Kwik Clean handles both commercial laundry and individual customer dry cleaning. Kwik Clean’s current dry cleaning process involves emitting a pollutant into the air. In addition, the commercial laundry and dry cleaning processes produce sediments and ot
> Johnson & Johnson (www.jnj.com), a major health care and pharmaceutical firm, voluntarily recalled a number of its products in 2010 because of quality problems. These products included hip-repair implants, contact lenses, and over-the-counter medications
> For each of the four steps of the plan–do–check–act cycle, describe examples of possible uses of management accounting information.
> Some firms in the fashion industry have adopted lean or just-in-time approaches to maintain or increase their competitive advantage. Read the following articles or other resources to address the questions below: “Brand-New Bag: Louis Vuitton Tries Modern
> Woodpoint Furniture Manufacturing produces various lines of pine furniture. The plant is organized so that all similar functions are performed in one area, as shown in Exhibit 7-17. Most pieces of furniture are made in batches of 10 units. Raw materials
> Precision Systems, Inc. (PSI).1 Precision Systems, Inc. (PSI) has been in business for more than 40 years and has generally reported a positive net income. The company manufactures and sells high-technology instruments (systems). Each product line at PSI
> Rossman Instruments, Inc., is considering leasing new state-of-the-art machinery at an annual cost of $900,000. The new machinery has a fouryear expected life. It will replace existing machinery leased one year earlier at an annual lease cost of $490,000
> Daniel Morris purchased a 42-inch plasma television, manufactured by TVCO, from a local electronics store that permits customers to return defective products within 30 days of purchase. Approximately 45 days after Daniel’s purchase, the TV began to malfu
> Why might customer retention rate be a poor measure of customer loyalty?
> What does a pricing waterfall chart depict?
> “Companies should avoid high cost-to-serve customers because they are unprofitable.” Do you agree with this statement? Explain.
> Why are nonfinancial measures alone insufficient for managing relationships with customers?
> Consider the descriptions of management accounting provided in the chapter. Discuss why the associated responsibilities are viewed as “accounting” and how people handling those responsibilities interface with other functional areas in fulfilling the stat
> What is the net promoter score and why is it recommended for use by companies?
> List and describe the five stages of a hierarchy for categorizing customer satisfaction and loyalty. Which companies that you know or deal with as a consumer create the highest form of loyalty for you?
> Provide three reasons why customer loyalty provides benefits to companies.
> “The only nonfinancial measure for customer relationships that our company should focus on is customer satisfaction.” Do you agree with this statement? Explain.
> What insights can life-cycle profitability analysis provide about customer profitability and the desirability of various customer groups?
> How might the structure of salespersons’ incentives or compensation plans contribute to unprofitable customer relationships?
> What are four broad groups of actions that managers might use to transform unprofitable customers into profitable ones?
> Provide an example of how customers may use a specific company’s resources or services very differently.
> Why must service companies, even more so than manufacturing companies, focus on customer costs and profitability?
> What is the typical shape of a graph of cumulative profits versus percentage of customers ranked from most profitable to least profitable?
> What are the two essential financial elements needed to arrive at a target cost?
> Kronecker Company, a growing mail-order clothing and accessory company, is concerned about its growing MSDA expenses. It therefore examined its customer ordering patterns for the past year and identified four different types of customers, as illustrated
> In which industries would you expect the net promoter score to have the greatest predictive power for repeat purchases and growth? The least predictive power for repeat purchases and growth?
> KEM Company has begun studying customer lifetime value for its customers and has prepared the information below for selected customers. For simplicity, management has assumed that for a given customer, the retention rate is the same every year until the
> Write an essay to explain how the 80–20 graph for sales revenues would be prepared and describe typical findings with respect to proportions of products and customers generating percentages of sales. Also, describe how a whale curve is prepared and typic
> Hampstead Company’s order entry department has 20 order entry operators. The cost associated with these 20 operators (salaries, fringe benefits, and supervision, as well as occupancy and equipment costs) is $873,600 per year. After taking into ac
> Saunders Company has recently become aware of the large total discounts on its orders and would like to know the impact on profit. The company computed its operating profit as follows: Required (a) Suppose Saunders could reduce its sales discounts to p
> Refer to the pricing waterfall chart in Exhibit 6-4. Required (a) What circumstances result in firms often failing to be aware of all of the discounts and allowances granted on a customer order? (b) Once a firm becomes aware of pricing waterfalls leadin
> For each of the categories below, provide a specific example of how a company might transform its breakeven or loss customers into profitable ones: a. Process improvements b. Activity-based (menu-based) pricing c. Managed customer relationships d. Discip
> Wright Company, a new systems consulting company, is concerned about the profitability of its customers during the past year. The company has prepared the following data: Required (a) Prepare a whale curve, as described in this chapter. (b) What percen
> Consider the operation of a fast-food company with hundreds of retail outlets scattered about the country. Consider the descriptions of management accounting provided in the chapter to identify management accounting information needs for the following: a
> Tetra Company’s cost system assigns MSDA expenses to customers using a rate of 33% of sales revenue. The new controller has discovered that Tetra’s customers differ greatly in their ordering patterns and interaction w
> Stan’s, a department store chain, has conducted a survey to collect data on customer satisfaction and perception of its merchandise and service. Data for responses to the question “How likely is it that you would recom
> Compute the customer lifetime value for Customer 421 based on the data below for the first six years of the customer relationship. Costs (ct) were incurred to promote customer retention to a rate of 0.8 in years 1 through 6.
> In response to how the sales incentives might be contributing to falling profits despite growing sales, Chan Company’s controller has produced the following information on last year’s sales to two customers that purcha
> Read the Wall Street Journal article “Survival Strategies: After Cost Cutting, Companies Turn toward Price Increases” by Timothy Aeppel (September 18, 2002, p. A1). The article reports “an all-out search for new ways to charge more money without raising
> Why might an organization not experience financial improvement even after using activity-based costing to identify and take action on promising opportunities for process improvements and cost reductions?
> Why do companies producing a varied and complex mix of products have higher costs than companies producing only a narrow range of products?
> “When a company produces both high volume products and low-volume products, traditional product costing systems are likely to over cost high-volume products.” Do you agree with this statement? Explain.
> Under what two conditions are volume based traditional product costing systems most likely to distort product costs? How do activity-based costing systems provide more accurate costs when these two conditions hold?
> Why are traditional volume-based cost allocation systems likely to systematically distort product costs?
> The decline in our profits has become intolerable. The severe price cutting in pumps has dropped our pre-tax margin to less than 2%, far below our historical 15% margins. Fortunately, our competitors are overlooking the opportunities for profit in flow c
> What advantages does time-driven ABC have over original activity-based costing?
> Why might individuals resist implementation of activity-based costing?
> What are some special considerations in the design of cost accounting systems for service organizations?
> Why are service organizations often ideally suited for activity-based costing?
> Why is practical capacity recommended in calculating capacity cost rates?
> How the information from an activity can based costing system guide improvements in operations and decisions about products and customers?
> What two sets of parameters must be estimated in time-driven ABC?
> How is a time-driven ABC system updated as resource costs increase or changes in operations occur?
> Riverdale Bone and Joint Surgery specializes in treating injuries related to bones and joints, as well as surgeries such as knee replacements and hip replacements. In addition to performing surgeries, Riverdale offers post-operation treatment. Riverdale
> Garber Company uses a traditional activity-based costing system to assign $600,000 of committed resource costs for customer service on the basis of the following information gathered from interviews with customer service personnel: Required (a) Compute
> For each of the following products, suggest three measures of quality: a. Television set b. University course c. Meal in an exclusive restaurant d. Carryout meal from a restaurant e. Container of milk f. Visit to the doctor g. Trip on an airplane h. Pair
> XZ Discount Brokerage is trying to determine the cost of supplying computing resources in order to determine how much to charge for trades. The company’s cost analyst is perplexed because XZ has acquired 80 servers to meet peak capacity needs, which occu
> Suppose an organization has not implemented either activity-based costing or a Balanced Scorecard but believes both would be valuable for the organization. However, management is currently willing to undertake only one major change initiative. Advise man
> Explain how an activity-based costing model can be linked to a Balanced Scorecard approach.
> Refer to the time-driven ABC analysis of forecasting resource capacity for the Madison Dairy ice cream plant example on pages 181–184 of this chapter. Suppose that all the information is the same except for the following: Required (a)
> CAN Company sells multiple products and uses a time-driven ABC system. The company’s products must be wrapped individually before shipping. The packaging and shipping department employs 24 people. Each person works 20 days per month on average. Employees
> Zeta Department Store has developed the following information in order to develop a time driven ABC model for its Accounts Receivable Department: The time to process payments of customer invoices depends on whether the customer pays the bill manually or
> (Adapted from CMA, June 1992) Alaire Corporation manufactures several different types of printed-circuit boards; however, two of the boards account for the majority of the company’s sales. The first of these boards, a TV circuit board,
> The Manhattan Company manufactures two models of compact disc players: a deluxe model and a regular model. The company has manufactured the regular model for years; the deluxe model was introduced recently to tap a new segment of the market. Since the in
> At its manufacturing plant in Duluth, Minnesota, Endo Electronics Company manufactures two products, X21 and Y37. For many years, the company has used a simple plant wide manufacturing support cost rate based on direct labor hours. A new plant accountant
> Smithers, Inc., manufactures and sells a wide variety of consumer products. The products are viewed as sufficiently profitable, but recently some product-line managers have complained about the charges for the call center that handles phone calls from cu
> Organizations in the public and nonprofit sector, such as government agencies and charitable social service entities, have financial systems that budget expenses and monitor and control actual spending. Explain why these organizations should consider dev
> (Adapted from CMA, December 1990) Moss Manufacturing has just completed a major change in its quality control (QC) process. Previously, products had been reviewed by QC inspectors at the end of each major process, and the company’s 10 Q
> Refer to the time-driven ABC analysis of the Madison Dairy ice cream plant example in the chapter. Required (a) Suppose indirect labor costs have increased by 10% from the original setting but all other information remains the same. Determine the total
> Potter Corporation has gained considerable market share in recent years for its specialty, low volume, complex line of products, but the gain has been offset by a loss in market share for its high-volume, simple line of products. This has resulted in a n
> Ken’s Cornerspot, a popular university eatery in a competitive market, has seating and staff capacity to serve about 600 lunch customers every day. For the past two months, demand has fallen from its previous near-capacity level. Concerned about his decl
> Halifax Brass Company manufactures pumps and valves and uses a time-driven activity-based cost (TDABC) system. Last year, Halifax recorded the following data for assigning manufacturing overhead costs to its products: Halifax also developed the followin
> The mayor of Gotham City is dissatisfied with the rising costs and deteriorating quality of the services provided by the city’s municipal workers, particularly in the transportation department: paving roads, repairing potholes, and cleaning the streets.
> Consider the case of the Cott Corporation, a Canadian private-label producer of high-quality cola beverages. Cott is attempting to get grocery retailers to stock its cola beverages as a lower price alternative to the more well-known brands of Coca-Cola a
> An article in the Wall Street Journal by Neal Templin and Joseph B. White (June 23, 1993) reported on the major changes occurring at General Motors. Its new chief executive officer, John Smith, had been installed after the board of directors requested th
> Towerton Financial Services13 Towerton Financial Services, a brokerage firm, started with a focus on stock trading and mutual funds. As the business grew, Towerton diversified into two new product lines, investment account management and financial plann
> Sippican Corporation (B)12 Refer to Case 5-36, the Sippican Corporation (A) case, which required time-drivenABC analysis. Sippican’s senior executive committee met to consider the implications from its time-driven ABC model. Frankly al
> The manager of a large semiconductor production department expressed his disdain for the cost information he was presently given: Cost variances are useless to me.2 I don’t want to ever have to look at a cost variance, monthly or weekly. Daily, I look at
