Question: Molander Corporation is a distributor of a

> In what way can the use of ROI as a performance measure for investment centers lead to bad decisions? How does the residual income approach overcome this problem?

> How is it possible for a cost that is traceable to a segment to become a common cost if the segment is divided into further segments?

> Why aren’t common costs allocated to segments under the contribution approach?

> Explain how the segment margin differs from the contribution margin.

> Distinguish between a traceable cost and a common cost. Give several examples of each.

> The auto repair shop of Quality Motor Company uses standards to control the labor time and labor cost in the shop. The standard labor cost for a motor tune-up is given below: The record showing the time spent in the shop last week on motor tune-ups has

> What benefits result from decentralization?

> Why does the balanced scorecard include financial performance measures as well as measures of how well internal business processes are doing?

> Maple Products, Ltd., manufactures a super-strong hockey stick. The standard cost of one hockey stick is: Last year, 8,000 hockey sticks were produced and sold. Selected cost data relating to last year’s operations follow: The follo

> Trueform Products, Inc., produces a broad line of sports equipment and uses a standard cost system for control purposes. Last year the company produced 8,000 varsity footballs. The standard costs associated with this football, along with the actual costs

> Genola Fashions began production of a new product on June 1. The company uses a standard cost system and has established the following standards for one unit of the new product: During June, the following activity was recorded regarding the new product

> Bliny Corporation makes a product with the following standard costs for direct material and direct labor: Direct material: 2.00 meters at $3.25 per meter ..................... $6.50 Direct labor: 0.40 hours at $12.00 per hour ...........................

> Lane Company manufactures a single product that requires a great deal of hand labor. Overhead cost is applied on the basis of standard direct labor-hours. Variable manufacturing overhead should be $2 per standard direct labor-hour and fixed manufacturing

> Chilczuk, S.A., of Gdansk, Poland, is a major producer of classic Polish sausage. The company uses a standard cost system to help control costs. Manufacturing overhead is applied to production on the basis of standard direct labor-hours. According to the

> “Wonderful! Not only did our salespeople do a good job in meeting the sales budget this year, but our production people did a good job in controlling costs as well,” said Kim Clark, president of Martell Company. “Our $18,300 overall manufacturing cost va

> Flandro Company uses a standard cost system and sets predetermined overhead rates on the basis of direct labor-hours. The following data are taken from the company’s budget for the current year: Denominator activity (direct labor-hours) ................

> Erie Company manufactures a small CD player called the Jogging Mate. The company uses standards to control its costs. The labor standards that have been set for one Jogging Mate CD player are as follows: During August, 5,750 hours of direct labor time

> Selected information relating to Yost Company’s operations for the most recent year is given below: Activity: Denominator activity (machine-hours) ............ 45,000 Standard hours allowed per unit …………….................. 3 Number of units produced ....

> The standard cost card for the single product manufactured by Cutter, Inc., is given below: Standard Cost Card—per Unit Direct materials, 3 yards at $6.00 per yard .......................................... $ 18 Direct labor, 4 hours a

> Selected operating information on three different companies for a recent year is given below: Required: For each company, state whether the company would have a favorable or unfavorable volume variance and why. Company A B Full-capacity machine-hou

> Norwall Company’s variable manufacturing overhead should be $3.00 per standard machine-hour and its fixed manufacturing overhead should be $300,000 per period. The following information is available for a recent period: a. The denominator activity of 60,

> Operating at a normal level of 30,000 direct labor-hours, Lasser Company produces 10,000 units of product each period. The direct labor wage rate is $12 per hour. Two and one-half yards of direct materials go into each unit of product; the material costs

> Primara Corporation has a standard cost system in which it applies overhead to products based on the standard direct labor-hours allowed for the actual output of the period. Data concerning the most recent year appear below: Total budgeted fixed overhea

> Privack Corporation has a standard cost system in which it applies overhead to products based on the standard direct labor-hours allowed for the actual output of the period. Data concerning the most recent year appear below: Variable overhead cost per d

> Only variable costs can be differential costs. Do you agree? Explain.

> Why can undue emphasis on labor efficiency variances lead to excess work in process inventories?

> Why do the measures used in a balanced scorecard differ from company to company?

> Refer to the data in Exercise 9–7. Assume that instead of producing 4,000 units during the month, the company produced only 3,000 units, using 14,750 pounds of material. (The rest of the material purchased remained in raw materials inve

> Define the following terms: differential cost, opportunity cost, and sunk cost.

> What is a statistical control chart, and how is it used?

> “The variable cost per unit varies with output, whereas the fixed cost per unit is constant.” Do you agree? Explain.

> If variable manufacturing overhead is applied to production on the basis of direct labor-hours and the direct labor efficiency variance is unfavorable, will the variable overhead efficiency variance be favorable or unfavorable, or could it be either? Exp

> What is meant by residual income?

> Is it possible for costs such as salaries or depreciation to end up as assets on the balance sheet? Explain.

> What is meant by the terms margin and turnover in ROI calculations?

> What effect, if any, would you expect poor-quality materials to have on direct labor variances?

> Why are product costs sometimes called inventoriable costs? Describe the flow of such costs in a manufacturing company from the point of incurrence until they finally become expenses on the income statement

> Lucido Products markets two computer games: Claim jumper and Makeover. A contribution format income statement for a recent month for the two games appears below: Required: 1. Compute the overall contribution margin (CM) ratio for the company. 2. Comput

> Huron Company produces a commercial cleaning compound known as Zoom. The direct materials and direct labor standards for one unit of Zoom are given below: During the most recent month, the following activity was recorded: a. Twenty thousand pounds of m

> Distinguish between (a) A variable cost, (b) A mixed cost, and (c) A step-variable cost. Plot the three costs on a graph, with activity plotted horizontally and cost plotted vertically.

> “Our workers are all under labor contracts; therefore, our labor rate variance is bound to be zero.” Discuss.

> Engberg Company installs lawn sod in home yards. The company’s most recent monthly contribution format income statement follows: Required: 1. Compute the company’s degree of operating leverage. 2. Using the degree of

> Describe how the inventory accounts of a manufacturing company differ from the inventory account of a merchandising company.

> Explain how a shift in the sales mix could result in both a higher break-even point and a lower net income.

> Should standards be used to identify whom to blame for problems?

> Describe the schedule of cost of goods manufactured. How does it tie into the income statement?

> Watkins Trophies, Inc., produces thousands of medallions made of bronze, silver, and gold. The medallions are identical except for the materials used in their manufacture. What costing system would you advise the company to use?

> What is meant by the term sales mix? What assumption is usually made concerning sales mix in CVP analysis?

> Olongapo Sports Corporation is the distributor in the Philippines of two premium golf balls—the Flight Dynamic and the Sure Shot. Monthly sales, expressed in pesos (P), and the contribution margin ratios for the two products follow: F

> Dawson Toys, Ltd., produces a toy called the Maze. The company has recently established a standard cost system to help control costs and has established the following standards for the Maze toy: Direct materials: 6 microns per toy at $0.50 per micron Dir

> What are the major limitations of activity-based costing?

> If the materials price variance is favorable but the materials quantity variance is unfavorable, what might this indicate?

> Describe how the income statement of a manufacturing company differs from the income statement of a merchandising company.

> What is meant by the term equivalent units of production when the weighted-average method is used?

> What is meant by the margin of safety?

> The Hartford Symphony Guild is planning its annual dinner-dance. The dinner-dance committee has assembled the following expected costs for the event: Dinner (per person) ............................................................... $18 Favors and prog

> Mauro Products distributes a single product, a woven basket whose selling price is $15 and whose variable expense is $12 per unit. The company’s monthly fixed expense is $4,200. Required: 1. Solve for the company’s break-even point in unit sales using t

> What are the three major ways in which activity-based costing improves the accuracy of product costs?

> The materials price variance can be computed at what two different points in time? Which point is better? Why?

> Explain the difference between a product cost and a period cost.

> Victoria Chocolates, Ltd., makes premium handcrafted chocolate confections in London. The owner of the company is setting up a standard cost system and has collected the following data for one of the company’s products, the Empire Truffle. This product i

> In response to a request from your immediate supervisor, you have prepared a CVP graph portraying the cost and revenue characteristics of your company’s product and operations. Explain how the lines on the graph and the break-even point would change if

> Outback Outfitters sells recreational equipment. One of the company’s products, a small camp stove, sells for $50 per unit. Variable expenses are $32 per stove, and fixed expenses associated with the stove total $108,000 per month. Required: 1. Compute

> Lin Corporation has a single product whose selling price is $120 and whose variable expense is $80 per unit. The company’s monthly fixed expense is $50,000. Required: 1. Using the equation method, solve for the unit sales that are required to earn a tar

> Assume that a company has two processing departments—Mixing followed by Firing. Explain what costs might be added to the Firing Department’s Work in Process account during a period.

> Why do overhead costs often shift from high-volume products to low-volume products when a company switches from a conventional costing method to activity-based costing?

> What costs are assigned to a segment under the contribution approach?

> Who is generally responsible for the materials price variance? The materials quantity variance? The labor efficiency variance?

> Define the following: (a) Direct materials (b) Indirect materials (c) Direct labor (d) Indirect labor, And (e) Manufacturing overhead

> Assume that a company has two processing departments—Mixing and Firing. Prepare a journal entry to show a transfer of work in process from the Mixing Department to the Firing Department.

> Why is activity-based costing described as a “two-stage” costing method?

> Logistics Solutions provides order fulfillment services for dot-com merchants. The company maintains warehouses that stock items carried by its dot-com clients. When a client receives an order from a customer, the order is forwarded to Logistics Solution

> What is meant by the term break-even point?

> Magic Realm, Inc., has developed a new fantasy board game. The company sold 15,000 games last year at a selling price of $20 per game. Fixed costs associated with the game total $182,000 per year, and variable costs are $6 per game. Production of the gam

> Data for Hermann Corporation are shown below: Required: 1. The marketing manager argues that a $5,000 increase in the monthly advertising budget would increase monthly sales by $9,000. Should the advertising budget be increased? 2. Refer to the origina

> What is a segment of an organization? Give several examples of segments.

> Why are separate price and quantity variances computed?

> What are the four hierarchical levels of activity discussed in the chapter?

> How many Work in Process accounts are maintained in a company that uses process costing

> What are the three major elements of product costs in a manufacturing company?

> What is meant by the term operating leverage?

> Due to erratic sales of its sole product—a high-capacity battery for laptop computers—PEM, Inc., has been experiencing difficulty for some time. The company’s contribution format income statement for the most recent month is given below: Sales (19,500 u

> SkyChefs, Inc., prepares in-flight meals for a number of major airlines. One of the company’s products is grilled salmon in dill sauce with baby new potatoes and spring vegetables. During the most recent week, the company prepared 4,000 of these meals us

> Fill in the missing amounts in each of the eight case situations below. Each case is independent of the others. a. Assume that only one product is being sold in each of the four following case situations: b. Assume that more than one product is being s

> Last month when Holiday Creations, Inc., sold 50,000 units, total sales were $200,000, total variable expenses were $120,000, and fixed expenses were $65,000. Required: 1. What is the company’s contribution margin (CM) ratio? 2. Estimate the change in

> Distinguish between a cost center, a profit center, and an investment center.

> What is meant by the term management by exception?

> What are the major differences between financial and managerial accounting?

> In all respects, Company A and Company B are identical except that Company A’s costs are mostly variable, whereas Company B’s costs are mostly fixed. When sales increase, which company will tend to realize the greatest increase in profits? Explain.

> The Fashion Shoe Company operates a chain of women’s shoe shops around the country. The shops carry many styles of shoes that are all sold at the same price. Sales personnel in the shops are paid a substantial commission on each pair of

> Jaffre Enterprises distributes a single product whose selling price is $16 and whose variable expense is $11 per unit. The company’s fixed expense is $16,000 per month. Required: 1. Prepare a profit graph for the company up to a sales level of 4,000 uni

> Why is cost accumulation simpler in a process costing system than it is in a job-order costing system?

> From the standpoint of cost control, why is the FIFO method superior to the weighted-average method?

> Bandar Industries Berhad of Malaysia manufactures sporting equipment. One of the company’s products, a football helmet for the North American market, requires a special plastic. During the quarter ending June 30, the company manufactured 35,000 helmets,

> Why do departmental overhead rates sometimes result in inaccurate product costs?

> Distinguish between ideal and practical standards?

> Why is activity-based costing growing in popularity?

> What are the four steps in the planning and control cycle?

> Often the most direct route to a business decision is an incremental analysis. What is meant by an incremental analysis?

> On the cost reconciliation part of the production report, the weighted-average method treats all units transferred out in the same way. How does this differ from the FIFO method of handling units transferred out?