Question: Refer to information in QS 6-6.

> Assume that you are preparing for a second interview with a manufacturing company. The company is impressed with your credentials but has indicated that it has several qualified applicants. You anticipate that in this second interview, you must show what

> Under absorption costing a company had the following per unit costs when 10,000 units were produced. Direct labor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 2 Direct material . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Var

> The production department described in Exercise 3-8 had $850,000 of direct materials and $650,000 of direct labor cost charged to it during April. Also, its beginning inventory included $118,840 of direct materials cost and $47,890 of direct labor. Info

> Piaggio, Polaris, and Arctic Cat are competitors in the global marketplace. Selected data forPiaggio follow. Required1. Review the discussion of the importance of the cost of goods sold divided by total expenses ratio in BTN 3-2. Compute the cost of go

> During April, the production department of a process manufacturing system completed a number of units of a product and transferred them to finished goods. Of these transferred units, 60,000 were in process in the production department at the beginning of

> Tavella Co.’s August 31 inventory of raw materials is $150,000. Raw materials purchases in September are $400,000, and factory payroll cost in September is $232,000. Overhead costs incurred in September are: indirect materials, $30,000;

> When output volume increases, do variable costs per unit increase, decrease, or stay the same within the relevant range of activity? Explain.

> What is a variable cost? Identify two variable costs.

> The following journal entries are recorded in Kiesha Co.’s process cost accounting system. Kieshaproduces apparel and accessories. Overhead is applied to production based on direct labor cost for the period. Prepare a brief explanation

> Refer to Exercise 5-10. (1) Prepare a contribution margin income statement for Blanchard Company showing sales, variable costs, and fixed costs at the break-even point. (2) If the company’s fixed costs increase by $135,000, what amount of sales (in dolla

> Rey Company’s single product sells at a price of $216 per unit. Cost data for its single product follows. Compute this company’s break-even volume in units. Direct materials . . . . . . . . . . . . . . . . . . . . . . . . $20 per unit Direct labor . . .

> Polarix is a retailer of ATVs (all-terrain vehicles) and accessories. An income statement for its Consumer ATV Department for the current year follows. ATVs sell, on average, for $3,800. Variable selling expenses are $270 each. The remaining selling expe

> MidCoast Airlines provides charter airplane services. In October this year, the company was operating at 60% of its capacity when it received a bid from the local community college. The college was organizing a Washington, D.C., trip for its internationa

> Way Cool produces two different models of air conditioners. The company produces the mechanical systems in their components department. The mechanical systems are combined with the housing assembly in its finishing department. The activities, costs, and

> Oak Mart, a producer of solid oak tables, reports the following data from its current year operations, which is its second year of business. Sales price per unit . . . . . . . . . . . . . . . . . . . . . . $320 per unit Units produced this year . . . .

> Hayek Furnaces prepares the income statement under variable costing for its managerial reports, and it prepares the income statement under absorption costing for external reporting. For its first month of operations, 375 furnaces were produced and 225 we

> Explain in simple terms the notion of equivalent units of production (EUP). Why is it necessary to use EUP in process costing?

> Swisher Company’s computer system generated the following trial balance on December 31, 2013. The company’s manager knows that the trial balance is wrong because it does not show any balance for Goods in Process Invent

> Tee-Pro has three types of costs: t-shirt cost, factory rent cost, and utilities cost. This company sells its shirts for $16.50 each. Management has prepared the following estimated cost information for next month under two different sales levels. Requ

> Jacquie Inc. reports the following annual cost data for its single product. Normal production and sales level . . . . . . . . . 60,000 units Sales price . . . . . . . . . . . . . . . . . . . . . . . . . . . . $56.00 per unit Direct materials . . . . . .

> When units produced exceed units sold for a reporting period, would income under variable costing be greater than, equal to, or less than income under absorption costing? Explain.

> Li Company produces a product that sells for $84 per unit. A customer contacts Li and offers to purchase 2,000 units of its product at a price of $68 per unit. Variable production costs with this order would be $30 per unit, and variable selling expenses

> Cool Sky Company reports the following costing data on its product for its first year of operations. During this first year, the company produced 44,000 units and sold 36,000 units at a price of $140 per unit. Production costs Direct materials per unit

> Ming Company had net income of $772,200 based on variable costing. Beginning and ending inventories were 7,800 units and 5,200 units, respectively. Assume the fixed overhead per unit was $3.00 for both the beginning and ending inventory. What is net inco

> Refer to the information for D’Souza Company in QS 6-2. Compute the contribution margin.

> Blanchard Company manufactures a single product that sells for $180 per unit and whose total variable costs are $135 per unit. The company’s annual fixed costs are $562,500. (1) Use this information to compute the company’s (a) contribution margin, (b) c

> Sager Company manufactures variations of its product, a technopress, in response to custom orders from its customers. On May 1, the company had no inventories of goods in process or finished goods but held the following raw materials. Material M . . . .

> Refer to the information about Ramort Company in QS 6-8. Would the answer to the question in QS 6-8 change if the company uses variable costing? Explain. Information from QS 6-8: Ramort Company reports the following cost data for its single product. The

> Polaris’s financial statements and notes in Appendix A provide evidence of growth potentialin its sales. Required1. Identify at least two types of costs that will predictably increase as a percent of sales with growth in sales. 2. Explain why you beli

> A jeans maker is designing a new line of jeans called the Slims. The jeans will sell for $205 per pair and cost $164 per pair in variable costs to make. (1) Compute the contribution margin per pair. (2) Compute the contribution margin ratio. (3) Describe

> Sims Company, a manufacturer of in-home decorative fountains, began operations on September 1 of the current year. Its cost and sales information for this year follows. Production costs Direct materials . . . . . . . . . . . . . . . . . . . . . . . $40

> Felix & Co. reports the following information about its sales and cost of sales. Draw an estimated line of cost behavior using a scatter diagram, and compute fixed costs and variable costs per unit sold. Then use the high-low method to estimate the f

> Company A is a manufacturer with current sales of $6,000,000 and a 60% contribution margin. Its fixed costs equal $2,600,000. Company B is a consulting firm with current service revenues of $4,500,000 and a 25% contribution margin. Its fixed costs equal

> Should Polaris use single product or multiproduct break-even analysis? Explain.

> _______ of _______ reflects expected sales in excess of the level of break-even sales.

> KTM has both fixed and variable costs. Why are fixed costs depicted as a horizontal line on a CVP chart?

> Why are multiple departmental overhead rates more accurate for product costing than a single plantwide overhead rate?

> Assume that a straight line on a CVP chart intersects the vertical axis at the level of fixed costs and has a positive slope that rises with each additional unit of volume by the amount of the variable costs per unit. What does this line represent?

> Ramort Company reports the following cost data for its single product. The company regularly sells 20,000 units of its product at a price of $60 per unit. If Ramort doubles its production to 40,000 units while sales remain at the current 20,000 unit leve

> In cost-volume-profit analysis, what is the estimated profit at the break-even point?

> How is a scatter diagram used to identify and measure the behavior of a company’s costs?

> List three methods to measure cost behavior.

> Trio Company reports the following information for the current year, which is its first year of operations. Direct materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $15 per unit Direct labor . . . . . . . . . . . . . . . . . . . . . .

> In December 2012, Yerbury Company’s manager estimated next year’s total direct labor cost assuming 50 persons working an average of 2,000 hours each at an average wage rate of $25 per hour. The manager also estimated the following manufacturing overhead

> In performing CVP analysis for a manufacturing company, what simplifying assumption is usually made about the volume of production and the volume of sales?

> Define and describe contribution margin per unit.

> Define and explain the contribution margin ratio.

> How is cost-volume-profit analysis useful?

> When output volume increases, do fixed costs per unit increase, decrease, or stay the same within the relevant range of activity? Explain.

> Empire Plaza Hotel is a luxury hotel with 400 rooms. Its regular room rate is $300 per night per room. The hotel’s cost is $165 per night per room and consists of the following. Variable direct labor and materials cost . . . . . . . . . . . . . . . . .

> Rafner Manufacturing identified the following data in its two production departments. Required1. What is the company’s single plantwide overhead rate based on direct labor hours? 2. What is the company’s single plant

> What are three common methods of assigning overhead costs to a product?

> Explain how contribution margin analysis is useful for managerial decisions and performance evaluations.

> Identify each of the following activities as unit level (U), batch level (B), product level (P), or facility level (F) to indicate the way each is incurred with respect to production. 1. Paying real estate taxes on the factory building. 2. Attaching labe

> List the three main advantages of the plantwide and departmental overhead rate methods.

> In the blank next to each of the following terms, place the letter A through D that corresponds to the description of that term. Some letters are used more than once. 1. Activity-based costing 2. Plantwide overhead rate metho 3. Departmental overhead rat

> In the blank next to the following terms, place the letter A through D corresponding to the best description of that term. 1. Activity 2. Activity driver 3. Cost object 4. Cost pool A. Measurement associated with an activity. B. A group of costs that hav

> The following is taken from Ronda Co.’s internal records of its factory with two operating departments. The cost driver for indirect labor and supplies is direct labor costs, and the cost driver for the remaining overhead items is numbe

> Refer to the data in QS 4-7. Assume that the following information is available for the company’s two products. RequiredAssign overhead costs to each product model using activity-based costing (ABC). What is the overhead cost per unit

> Xie Company identified the following activities, costs, and activity drivers. The company manufactures two types of go-karts: Deluxe and Basic. Production volume is 10,000 units of the Deluxe model and 30,000 units of the Basic model. Required1. Comput

> A company has two products: standard and deluxe. The company expects to produce 36,375 standard units and 62,240 deluxe units. It uses activity-based costing and has prepared the following analysis showing budgeted cost and cost driver activity for each

> In December 2012, Pavelka Company’s manager estimated next year’s total direct labor cost assuming 50 persons working an average of 2,000 hours each at an average wage rate of $15 per hour. The manager also estimated the following manufacturing overhead

> Tent Pro produces two lines of tents sold to outdoor enthusiasts. The tents are cut to specifications in department A. In department B the tents are sewn and folded. The activities, costs, and drivers associated with these two manufacturing processes and

> What are the major limitations of variable costing?

> Why are overhead costs allocated to products and not traced to products as direct materials and direct labor are?

> Mathwerks produces two electronic, handheld educational games: Fun with Fractions and Count Calculus. Data on these products follow. Additional data from its two production departments follow. Required1. Using ABC, determine the cost of each product l

> Ryan Foods produces gourmet gift baskets that it distributes online as well as from its small retail store. The following details about overhead costs are taken from its records. Additional information on the drivers for its production activities follo

> Midwest Paper produces cardboard boxes. The boxes require designing, cutting, and printing. (The boxes are shipped flat and customers fold them as necessary.) Midwest has a reputation for providing highquality products and excellent service to customers,

> Wade Company makes two distinct products with the following information available for each. The company’s direct labor rate is $20 per direct labor hour (DLH). Additional information follows. Required 1. Compute the manufacturing co

> The following data are for the two products produced by Tadros Company. The company’s direct labor rate is $20 per direct labor hour (DLH). Additional information follows. Required1. Compute the manufacturing cost per unit using the

> Sara’s Salsa Company produces its condiments in two types: Extra Fine for restaurant customers and Family Style for home use. Salsa is prepared in department 1 and packaged in department 2. The activities, overhead costs, and drivers as

> Bright Day Company produces two beverages, Hi-Voltage and EasySlim. Data about these products follow. Additional data from its two production departments follow. Required1. Determine the cost of each product line using ABC.2. What is the cost per bottl

> Craft Pro Machining produces machine tools for the construction industry. The following details about overhead costs were taken from its company records. Additional information on the drivers for its production activities follows. Grinding . . . . . .

> Xylon Company manufactures custom-made furniture for its local market and produces a line of home furnishings sold in retail stores across the country. The company uses traditional volume-based methods of assigning direct materials and direct labor to it

> Smythe Crystal makes fine tableware in its Ireland factory. The following data are taken from its production plans for the year. Direct labor costs . . . . . . . . . €5,870,000 Setup costs. . . . . . . . . . . . . . . 630,000 Required

> Prescott Company’s predetermined overhead rate is 200% of direct labor. Information on the company’s production activities during September 2013 follows. a. Purchased raw materials on credit, $125,000. b. Paid $84,000 cash for factory wages. c. Paid $11,

> Polaris must assign overhead costs to its products. Activity-based costing is generally considered more accurate than other methods of assigning overhead. If this is so, why do all manufacturing companies not use it?

> Textra Plastics produces parts for a variety of small machine manufacturers. Most products go through two operations, molding and trimming, before they are ready for packaging. Expected costs and activities for the molding department and for the trimming

> Label each statement below as either true (“T”) or false (“F”). 1. The cost per equivalent unit is computed as the total costs of a process divided by the number of equivalent units passing through that process. 2. Service companies are not able to use p

> List the headings of the three major sections of a process cost summary.

> Put the four steps in accounting for production activities in the order in which they would occur.a. Determine physical flow of units b. Compute the cost per equivalent unit c. Compute equivalent units of production d. Assign and reconcile costs

> The cost of beginning inventory plus the costs added during the period should equal the cost of units _____________________ plus the cost of _____________________.

> The following refers to units processed in Sunfllower Printing’s binding department in March. Compute the total equivalent units of production with respect to labor for March using the weighted-average inventory method. Units of Per

> Blanche’s Boxes completed 20,000 boxes costing $275,000 and transferred them to finished goods. Prepare its journal entry to record the transfer of the boxes from production to finished goods inventory.

> Blanche’s Boxes incurred $135,000 in factory payroll costs, of which $125,000 was direct labor. Prepare journal entries to record its (1) total factory payroll incurred and (2) direct labor used in production.

> What conditions must exist to achieve accurate short-run pricing decisions using variable costing?

> Blanche’s Boxes makes cardboard shipping cartons in a single operation. This period, Blanche purchased $62,000 in raw materials. Its production department requisitioned $50,000 of those materials for use in producing cartons. Prepare journal entries to r

> For each of the following products and services, indicate whether it is most likely produced in a process operation or in a job order operation. 1. Tennis courts 2. Apple juice 3. Vanilla ice cream 4. Luxury cars

> Why is overhead allocation under ABC usually more accurate than either the plantwide overhead allocation method or the departmental overhead allocation method?

> Refer to QS 3-14 and compute the total equivalent units of production with respect to labor for July using the FIFO inventory method. Information from QS 3-14: The following refers to units processed by an ice cream maker in July. Compute the total equi

> The computer workstation furniture manufacturing that Adria Lopez started in January is progressing well. As of the end of June, Success Systems’ job cost sheets show the following total costs accumulated on three furniture jobs. Job

> Anheuser-Busch InBev is attempting to reduce its water usage. How could a company manager use a process cost summary to determine if the program to reduce water usage is successful?

> Refer to QS 3-6 and compute the total equivalent units of production with respect to labor for March using the FIFO inventory method. Information from QS 3-6: The following refers to units processed in Sunfllower Printing’s binding dep

> Explain how a car maintenance and repair garage might use a hybrid costing system.

> Blanche’s Boxes requisitioned $9,000 of indirect materials from its raw materials and used $10,000 of indirect labor in its production of boxes. Also, it incurred $156,000 of other factory overhead costs. It applies factory overhead at the rate of 140% o

> Belda Co. manufactures a single product in one department. Direct labor and overhead are added evenly throughout the process. Direct materials are added as needed. The company uses the FIFO method of process costing. During March, the company completed a

> What costs are normally included as part of product costs under the method of absorption costing?

> Refer to the information in Problem 3-2B and complete its parts (1) through (4) using the FIFO method of process costing. Round cost per equivalent unit calculations to two decimal places. Information from Problem 3-2B: Abraham Company uses process cost

> During May, the production department of a process manufacturing system completed a number of units of a product and transferred them to finished goods. Of these transferred units, 62,500 were in process in the production department at the beginning of M

> Refer to the information in Problem 3-5B. Assume that Switch uses the FIFO method to account for its process costing system. The following additional information is available. ● Beginning goods in process consists of 10,000 units that w