Question: Schopp Inc. has been manufacturing its own

> Consider Example 4.1 and the accompanying Figure 4.6 from the book chapter.a. (**) Calculate the percent value-added time for the current process. Which activities do you consider to be value added? Why?b. (***) Suppose management actually does put a sys

> Average waiting times and ride times for two of Dizzy- World’s rides are as follows:a. (*) Calculate the percent value-added time for each ride.b. (**) Now suppose DizzyWorld puts in place a reservation system for the Haunted Roller Coa

> (**) When a driver enters the license bureau to have his license renewed, he spends, on average, 45 minutes in line, 2 minutes having his eyes tested, and 3 minutes to have his photograph taken. What is the percent value-added time? Explain any assumptio

> Insurance agency has determined that the standard time to replace a fender is 2.5 hours (i.e., “standard output” = 0.4 fenders per hour) and is willing to pay Gibson $50 per hour for labor (parts and supplies are billed separately). Gibson pays its worke

> (**) Precision Machinery has set standard times for its field representatives to perform certain jobs. The standard time allowed for routine maintenance is 2 hours (i.e., “standard output” = 0.5 jobs per hour). One of

> (*) A customer support job requires workers to complete a particular online form in 60 seconds. Les can finish the form in 70 seconds. What is his efficiency? What other performance measures might be important here?

> The state tax department wants to set up what would amount to a series of identical production lines (running 8 hours a day) for processing state tax returns that are submitted on the state’s “EZ” for

> Smarmy Sales, Inc. (SSI), sells herbal remedies through its Web site and through phone reps. Over the past six years, SSI has started to depend more and more on its Web site to generate sales. The figures below show total sales, phone rep costs, and Web

> (**) Consider the output and labor hour figures shown in the following table. Calculate the labor productivity for each week, as well as the average labor productivity for all six weeks. Do any of the weeks seem unusual to you? Explain.,,,

> Marci spends 15 hours researching and writing a 20-page report for her philosophy class. Jack brags that he has a “streamlined process” for performing the researching and writing. Jack takes just 8 hours to research and write the paper, but his report is

> Faircloth Financial specializes in home equity loans, loans that customers can take out against the equity they have in their homes. (“Equity” represents the difference between the home’s value and the amount a customer owns on any other loans.) The curr

> Billy’s Hamburger Barn has a single drive-up window. Currently, there is one attendant at the window who takes the order (30–40 seconds), gathers up the food and bags it (30–120 seconds), and then takes the customer’s money (30–40 seconds) before handing

> (***) (Microsoft Excel problem) The following figure shows an Excel spreadsheet that calculates the value index for each of two alternative suppliers. Re-create this spreadsheet in Excel. You should develop the spreadsheet so that the results will be rec

> Reconsider Figure 2.3. Suppose Supplier B improves its conformance quality so that the chemicals it produces are now 99.9% pure. The chart at the bottom of the previous page shows the new competitive situation: a. (*) Will this be enough to make Supplie

> A Chicago-based manufacturer is looking for someone to handle its shipments to the West Coast. In order to evaluate potential transportation providers, the manufacturer has developed the following criteria. At a minimum, a shipper must be able to:a. Pick

> You have just graduated from college and are looking to buy your first car. Money is tight right now, so you are concerned with initial cost as well as ongoing expenses. At the same time, you don’t want to drive a slow, outdated car lik

> Visit the Web site for the Supply Chain Council, at www .supply-chain.org. What is the purpose of the council? Who are some of the members?

> LightEdge Technologies would like to put in place an assembly line in its Mexican facility that puts together Internet servers. The tasks needed to accomplish this, including times and predecessor relationships, are as follows:a. (*) Draw a precedence di

> Visit the Web sites for the professional organizations listed in this chapter. Who are their target audiences? Are some more focused on purchasing professionals or logistics professionals? Which of the careers listed in these Web sites are mentioned in t

> Draw out the transformation process similar to Figure 1.1 for a simple operations function, such as a health clinic or a car repair shop. What are the inputs? The outputs?

> AnderSet Laboratories produces rough lenses that will ultimately be ground into precision lenses for use in laboratory equipment. The company has developed the following thickness measures, based on 15 samples of four lenses that were taken when the proc

> (**) LaBoing produces springs, which are categorized as either acceptable or defective. During a period in which the manufacturing processes are under control, LaBoing takes multiple samples of 100 springs each, resulting in a calculated p value of 0.07.

> (*) The River Rock Company sells 200-pound bags of decorative rocks for landscaping use. The current bagging process yields samples with X and R values of 200 pounds and 12 pounds, respectively. Each sample consists of 12 observations. Develop the approp

> mean value of 64 ounces and a standard deviation of 6 ounces.a. (**) Suppose that the upper and lower tolerance limits are 79 and 65 ounces, respectively. What is the process capability ratio? What would the standard deviation have to be in order for the

> Leah’s Toys guarantees to ship customer orders in 24 hours or less. The following chart contains results for five samples of nine customer orders each:a. (**) Based on these results, estimate the p and Sp values.b. (**) A student commen

> Leah’s Toys makes rubber balls. The current process is capable of producing balls that weigh, on average, 3 ounces, with a standard deviation of 0.25 ounces.a. (*) What is the process capability ratio, assuming upper and lower tolerance limits of 3.5 and

> (*) Leah’s Toys produces molded plastic baby rattles. These rattles must be completely smooth. That is, there can be no rough edges where the molded halves fit together. Rattles are judged to be either acceptable or defective with regard to this requirem

> (*) Tyler Apiaries sells bees and beekeeping supplies. Bees (including a queen) are shipped in special packages according to weight. Suppose Tyler changes its processes so that the average package weight is now 1.7 kg, with a new standard deviation of 0.

> (**) Solar Stoves makes high-end gas stoves for domestic use. The total task time needed to make a stove is 400 seconds, with the longest individual task taking 60 seconds. Solar stoves would like to set up a line capable of producing 100 coolers per 8-h

> (**) Lazy B Ranch produces leather hides for use in the furniture and automotive upholstery industry. The company has taken 10 samples of nine observations each, measuring the square footage of each hide. Summary data are as follows: Use these data to s

> (*) Tyler Apiaries sells bees and beekeeping supplies. Bees (including a queen) are shipped in special packages according to weight. The target weight of a package is 1.5 kg. Historically, Tyler’s shipments have weighed on average 1.5 kg, with a standard

> (***) (Microsoft Excel problem) The Excel spreadsheet to the right calculates the upper and lower control limits for an attribute (in this case, the proportion of dissatisfied customers). Re-create this spreadsheet in Excel. You should develop the spread

> (***) (Microsoft Excel problem) The Excel spreadsheet at the top of the next page calculates the upper and lower control limits for a continuous variable. Re-create this spreadsheet in Excel. You should develop the spreadsheet so that the results will be

> The Oceanside Apparel Company manufactures men’s knit shirts. The production process requires material to be cut into large patterned squares, which are then sewn together. If the squares are not the correct length, the final shirt will

> Central Airlines would like to set up a control chart to monitor its on-time arrival performance. Each day over a 10-day period, Central Airlines chose 30 flights at random and tracked the number of late arrivals in each sample. The results are as follow

> BHC produces bags of cement. The stated weight for a bag of cement is 200 pounds. Customers will accept an occasional bag weighing as little as 196 pounds, as long as the average weight is at least 209 pounds. At the same time, BHC doesn’t want to give a

> Crawford Pharmaceuticals has developed a new drug, Vaxidene. The target amount for a single dose of Vaxidene is 125 mg. Patients can receive as little as 98 mg or as much as 102 mg without experiencing any ill effects. Because of potential liability issu

> EK Chemical Company sells a specialty chemical in packages marked 100 g. In reality, EK has set the process mean at 100.5 g, and the process currently has a standard deviation of 0.50 g. Suppose the customer will accept anywhere least 100 g.a. (**) Calc

> An insurance company has an online help service for its customers. Customer queries that take more than 5 minutes to resolve are categorized as “unsatisfactory” experiences. To evaluate the quality of its service, the

> (*) A production line has five workstations and a 60-second cycle time. The total amount of actual task time across all four workstations is 120 seconds. What is the idle time? The percent idle time? The efficiency delay?

> All Frute Company bottles and distributes Frute Ade, a fruit drink. The beverage is sold for 50 cents per 16-ounce bottle to retailers, who charge customers 70 cents per bottle. For the year 2014, management estimates the following revenues and costs.Ins

> Jorge Company bottles and distributes B-Lite, a diet soft drink. The beverage is sold for 50 cents per 16-ounce bottle to retailers, who charge customers 75 cents per bottle. For the year 2014, management estimates the following revenues and costs.(a) Pr

> Schultz Electronics manufactures two large-screen television models: the Royale which sells for $1,600, and a new model, the Majestic, which sells for $1,300. The production cost computed per unit under traditional costing for each model in 2014 was as f

> FireOut, Inc. manufactures steel cylinders and nozzles for two models of fire extinguishers: (1) a home fire extinguisher and (2) a commercial fire extinguisher. The home model is a high-volume (54,000 units), half-gallon cylinder that holds 2 1/2 pounds

> Altex Inc. manufactures two products: car wheels and truck wheels. To determine the amount of overhead to assign to each product line, the controller, Robert Hermann, has developed the following information.Instructions:(a) Compute the overhead cost assi

> Innova uses 1,000 units of the component IMC2 every month to manufacture one of its products. The unit costs incurred to manufacture the component are as follows.Direct materials ………………….65Direct labor ………………45Overhead ……………….126.5Total……………..236.5Overhe

> DeWitt Company uses flexible budgets to control its selling expenses. Monthly sales are expected to range from $170,000 to $200,000. Variable costs and their percentage relationship to sales are sales commissions 6%, advertising 4%, traveling 3%, and del

> Norton Company reports the following operating results for the month of August: sales $310,000 (units 5,000); variable costs $210,000; and fixed costs $75,000. Management is considering the following independent courses of action to increase net income.1

> Using the information in E22-3, assume that in July 2014, Thome Company incurs the following manufacturing overhead costs.Instructions:(a) Prepare a flexible budget performance report, assuming that the company worked 9,000 direct labor hours during the

> Turney Company produces and sells automobile batteries, the heavy-duty HD-240. The 2014 sales forecast is as follows.Quarter HD-240……………….HD-2401……………….50002…………………….70003…………………80004…………………..10000The January 1, 2014, inventory of HD-240 is 2,000 units.

> Thome Company uses a flexible budget for manufacturing overhead based on direct labor hours. Variable manufacturing overhead costs per direct labor hour are as follows.Indirect labor …………………1Indirect materials ……………….0.6Utilities ……………….0.4Fixed overhead

> Edington Electronics Inc. produces and sells two models of pocket calculators, XQ-103 and XQ-104. The calculators sell for $15 and $25, respectively. Because of the intense competition Edington faces, management budgets sales semiannually. Its projection

> BAK Corp. is considering purchasing one of two new diagnostic machines. Either machine would make it possible for the company to bid on jobs that it currently isn’t equipped to do. Estimates regarding each machine are provided below.Ins

> Atlanta Company is preparing its manufacturing overhead budget for 2014. Relevant data consist of the following.Units to be produced (by quarters): 10,000, 12,000, 14,000, 16,000.Direct labor: time is 1.5 hours per unit.Variable overhead costs per direct

> Chen Minerals processes materials extracted from mines. The most common raw material that it processes results in three joint products: Larco, Marco, and Narco. Each of these products can be sold as is, or each can be processed further and sold for a hig

> Cook Company estimates that 300,000 direct labor hours will be worked during the coming year, 2014, in the Packaging Department. On this basis, the budgeted manufacturing overhead cost data, shown below, are computed for the year.During October, 27,000 d

> Frio Company uses standard costs with its job order cost accounting system. In January, an order (Job No. 84) was received for 5,500 units of Product D. The standard cost of 1 unit of Product D is as follows.Direct materials—1.5 pounds at $4.00 per pound

> The Bonita Inn is trying to determine its break-even point. The inn has 75 rooms that are rented at $60 a night. Operating costs are as follows.Salaries………………………………………………….8800Utilities………………………………………………..2400Depreciation………………………………………... 1500Maintenanc

> Isaac’s Auto Repair is considering the purchase of a new tow truck. The garage doesn’t currently have a tow truck, and the $65,000 price tag for a new truck would represent a major expenditure for the garage. Isaac Mayer, owner of the garage, has compile

> The Borders and Noble partnership is considering three long-term capital investment proposals. Each investment has a useful life of 5 years. Relevant data on each project are as follows.Depreciation is computed by the straight-line method with no salvage

> Huang Company uses a standard cost accounting system to account for the manufacture of exhaust fans. In July 2014, it accumulates the following data relative to 1,800 units started and finished.Manufacturing overhead was applied on the basis of direct la

> Mercer Farm Supply Company manufactures and sells a fertilizer called Basic II. The following data are available for preparing budgets for Basic II for the first 2 quarters of 2014.1. Sales: quarter 1, 40,000 bags; quarter 2, 50,000 bags. Selling price i

> Jane’s Auto Care is considering the purchase of a new tow truck. The garage doesn’t currently have a tow truck, and the $60,000 price tag for a new truck would represent a major expenditure. Jane Austen, owner of the garage, has compiled the estimates sh

> Henkel Company is considering three long-term capital investment proposals. Each investment has a useful life of 5 years. Relevant data on each project are as follows.Depreciation is computed by the straight-line method with no salvage value. The company

> Jorgensen Corporation uses standard costs with its job order cost accounting system. In January, an order (Job No. 12) for 1,900 units of Product B was received. The standard cost of one unit of Product B is as follows.Normal capacity for the month was 4

> Gutierrez Company has four operating divisions. During the first quarter of 2014, the company reported aggregate income from operations of $213,000 and the following divisional results.Discontinuance of any division would save 50% of the fixed costs and

> Hill Company uses budgets in controlling costs. The August 2014 budget report for the company’s Assembling Department is as follows.The monthly budget amounts in the report were based on an expected production of 60,000units per month o

> Sutton Industrial Products Inc. (SIPI) is a diversified industrial-cleaner processing company. The company’s Verde plant produces two products: a table cleaner and a floor cleaner from a common set of chemical inputs (CDG). Each week 90

> Wilkins Inc. has two types of handbags: standard and custom. The controller has decided to use a plantwide overhead rate based on direct labor costs. The president has heard of activity-based costing and wants to see how the results would differ if this

> Ayala Corporation accumulates the following data relative to jobs started and finished during the month of June 2014.Overhead is applied on the basis of standard machine hours. Three hours of machine time are required for each direct labor hour. The jobs

> Felde Company builds custom fishing lures for sporting goods stores. In its first year of operations, 2014, the company incurred the following costs.Variable Costs per UnitDirect materials ………………………7.5Direct labor………………………..2.45Variable manufacturing ove

> Doug’s Custom Construction Company is considering three new projects, each requiring an equipment investment of $22,000. Each project will last for 3 years and produce the following net annual cash flows.The equipment’s salvage value is zero, and Doug us

> Judy Jean, a recent graduate of Rolling’s accounting program, evaluated the operating performance of Artie Company’s six divisions. Judy made the following presentation to Artie’s board of directors a

> Nona Inc., which produces a single product, has prepared the following standard cost sheet for one unit of the product.Direct materials (8 pounds at $2.50 per pound) ……………………..20Direct labor (3 hours at $12.00 per hour) ………………..36During the month of Apri

> The standard cost of Product B manufactured by MIT Company includes three units of direct materials at $5.00 per unit. During June, 29,000 units of direct materials are purchased at a cost of $4.70 per unit, and 29,000 units of direct materials are used

> Major Instrument, Inc. manufactures two products: missile range instruments and space pressure gauges. During April, 50 range instruments and 300 pressure gauges were produced, and overhead costs of $94,500 were estimated. An analysis of estimated overhe

> The Polishing Department of Harbin Company has the following production and manufacturing cost data for September. Materials are entered at the beginning of the process.Production: Beginning inventory 1,600 units that are 100% complete as to materials an

> Stahl Inc. produces three separate products from a common process costing $100,000. Each of the products can be sold at the split-off point or can be processed further and then sold for a higher price. Shown below are cost and selling price data for a re

> The Green Acres Inn is trying to determine its break-even point. The inn has 50 rooms that it rents at $60 a night. Operating costs are as follows.Salaries ……………………………….6200 per monthUtilities …………………………………1100 per monthDepreciation………………………………..1000 per

> Hank Itzek manufactures and sells homemade wine, and he wants to develop a standard cost per gallon. The following are required for production of a 50-gallon batch.3,000 ounces of grape concentrate at $0.06 per ounce54 pounds of granulated sugar at $0.30

> Refer to Table 12.1 in the text and look at the period from 1973 through 1980:Table 12.1:a. Calculate the average return for Treasury bills and the average annual inflation rate (consumer price index) for this period.b. Calculate the standard deviation o

> Suppose the spot and three-month forward rates for the yen are ¥114.32 and ¥116.03, respectively.a. Is the yen expected to get stronger or weaker?b. What would you estimate is the difference between the inflation rates of the United States and Japan?

> You observe that the inflation rate in the United States is 3.9 percent per year and that T-bills currently yield 5.8 percent annually. What do you estimate the inflation rate to be in:a. Australia, if short-term Australian government securities yield 4

> Suppose the spot and six-month forward rates on the Norwegian krone are Kr 5.15 and Kr 5.22, respectively. The annual risk-free rate in the United States is 3.8 percent, and the annual risk-free rate in Norway is 5.7 percent.a. Is there an arbitrage oppo

> Take a look back at Figure 21.1 to answer the following questions:Figure 21.1:a. If you have $100, how many euros can you get?b. How much is one euro worth?c. If you have 5 million euros, how many dollars do you have?d. Which is worth more, a New Zealand

> Air Spares is a wholesaler that stocks engine components and test equipment for the commercial aircraft industry. A new customer has placed an order for eight high-bypass turbine engines, which increase fuel economy. The variable cost is $1.6 million per

> The Arizona Bay Corporation sells on credit terms of net 30. Its accounts are, on average, 8 days past due. If annual credit sales are $8.4 million, what is the company’s balance sheet amount in accounts receivable?

> Essence of Skunk Fragrances, Ltd., sells 5,600 units of its perfume collection each year at a price per unit of $425. All sales are on credit with terms of 1/10, net 40. The discount is taken by 60 percent of the customers. What is the amount of the comp

> Rise Above This, Inc., has an average collection period of 39 days. Its average daily investment in receivables is $47,500. What are annual credit sales? What is the receivables turnover?

> Skye Flyer, Inc., has weekly credit sales of $19,400, and the average collection period is 34 days. The cost of production is 75 percent of the selling price. What is the average accounts receivable figure?

> Kyoto Joe, Inc., sells earnings forecasts for Japanese securities. Its credit terms are 210, net 30. Based on experience, 65 percent of all customers will take the discount.a. What is the average collection period for Kyoto Joe?b. If Kyoto Joe sells 1,30

> Consider the following information:a. What is the expected return on an equally weighted portfolio of these three stocks?b. What is the variance of a portfolio invested 20 percent each in A and B and 60 percent in C?

> The Sand Surfer Corporation has annual sales of $47 million. The average collection period is 36 days. What is the average investment in accounts receivable as shown on the balance sheet?

> The Techtronic’s store begins each week with 300 phasers in stock. This stock is depleted each week and reordered. If the carrying cost per phaser is $41 per year and the fixed order cost is $95, what is the total carrying cost? What is the restocking co

> Redan Manufacturing uses 2,500 switch assemblies per week and then reorders another 2,500. If the relevant carrying cost per switch assembly is $9, and the fixed order cost is $1,700, is Redan’s inventory policy optimal? Why or why not?

> Devour, Inc., is considering a change in its cash only sales policy. The new terms of sale would be net one month. Based on the following information, determine if Devour should proceed or not. Describe the buildup of receivables in this case. The requir

> You place an order for 400 units of inventory at a unit price of $125. The supplier offers terms of 1/10, net 30.a. How long do you have to pay before the account is overdue? If you take the full period, how much should you remit?b. What is the discount

> No More Pencils, Inc., disburses checks every two weeks that average $93,000 and take seven days to clear. How much interest can the company earn annually if it delays transfer of funds from an interest-bearing account that pays .015 percent per day for

> It takes Cookie Cutter Modular Homes, Inc., about six days to receive and deposit checks from customers. Cookie Cutter’s management is considering a lockbox system to reduce the firm’s collection times. It is expected that the lockbox system will reduce

> Paper Submarine Manufacturing is investigating a lockbox system to reduce its collection time. It has determined the following:The total collection time will be reduced by three days if the lockbox system is adopted.a. What is the PV of adopting the syst