2.99 See Answer

Question: To: Brad Hadley, President, American Vinyl Products

To: Brad Hadley, President, American Vinyl Products (AVP) From: Bev Trudeau, Director of Purchasing, American Performance Car, CA Subject: Customer Service at American Vinyl Products Our two companies have basically had a good relationship over the last two years. We have generally been pleased with both the quality of the products as well as the price offered. These features, while important, are not critical. Critical to our future relations is customer service. This is one area where you have recently fallen down. Our staff persistently experienced delays in getting through to your staff by phone. When we do, we experience further delays in getting answers. Our needs are few but simple. We want to contact American Vinyl quickly. We want to get through to a person quickly. We want to place orders, confirm status, change requirements, and address order problems quickly. Three days ago, Brad Allenby from our purchasing department spent 20 minutes waiting to get through. He had a critical problem that had to be resolved. He kept waiting. All the time, all he heard was how it was important that he remain on the line and that he would be answered in the order in which he was received. He finally gave up and called Joan in your marketing department. Even then, it took 24 hours before he got an answer. This is unacceptable. Unless you adequately resolve the problems with your phone system, we will take our business else-where. As you are aware, your contract with American Performance Car is going to be up for review in six months. Your product is not so unique that we cannot quickly find an alternative supplier. I am sorry for the angry tenor of this letter. However, this note reflects the frustration that we have experienced. It is totally unacceptable that we cannot even get hold of anyone at American Vinyl after 3 p.m. our time here in California. Your company must become more customer-oriented. Or else. You have 90 days to provide us with an acceptable resolution to the current situation. As Tom Adamson, the vice president for operations at American Vinyl Products, put down the fax and looked at Brad, the president, Tom knew that things were not good. The phone system had been a persistent source of problems for American Vinyl Products (AVP). Tom knew that this complaint was not an isolated event. He also knew that Brad had commissioned a local telecommunications company to do a study on AVP’s phone system. Their recommendation was that a new system be put in that offered more lines and more staff capacity. Brad thought that this might be the answer. Tom also knew that he would be asked to come up with recommendations for improving the current system. As Tom got up and left the office, he reviewed the information that he had recently gathered. AVP was a small manufacturer of vinyl and plastic products, including vinyl car products (decals and pin striping for cars), plastic after-market products (new brake lenses for cars designed to make the car look more sporty), and decals for the recreational market (AVP sold name decals to FourWinns in the boating marketing and to Bombardier in the ski-doo and sea-doo markets). Located in Charlotte, Michigan, this company had experienced a great deal of recent growth. Part of the reason for this growth could be traced to the excellent customer service that AVP gave its customers. AVP sold primarily to three groups of customers. The first were the do-it-yourselfers (DIY). These typically bought vinyl striping from a local retail or car accessory store. As a rule, their purchases were very small yet they needed a great deal of information. Often, they would call AVP asking for a catalog of products, information on how to use AVP’s products (or information on how to correct a problem with an AVP product), or information on where they could get AVP products. As a rule, DIYs were very price sensitive. The second market consisted of professional users. These were the people who used AVP products as part of their business (such as a body shop). While buying a moderate amount of product, they were often more interested in getting very technical information pertaining to the use of an AVP product. They were often considered to be very demanding with the result that only the most experienced sales staff worked with them. Finally, there were large corporate accounts, accounts such as American Performance Car. These accounts would call AVP typically to place orders, to determine the status of current orders, and to see if they could change the status of current orders (change the due date, the order quantities, the product mix, and so on). Typically, their calls were short and to the point. The differences between the three groups are summarized in the table below.
To: Brad Hadley, President, American Vinyl Products (AVP)
From: Bev Trudeau, Director of Purchasing, American Performance Car, CA
Subject: Customer Service at American Vinyl Products
Our two companies have basically had a good relationship over the last two years. We have generally been pleased with both the quality of the products as well as the price offered. These features, while important, are not critical. Critical to our future relations is customer service. This is one area where you have recently fallen down. Our staff persistently experienced delays in getting through to your staff by phone. When we do, we experience further delays in getting answers. Our needs are few but simple. We want to contact American Vinyl quickly. We want to get through to a person quickly. We want to place orders, confirm status, change requirements, and address order problems quickly. Three days ago, Brad Allenby from our purchasing department spent 20 minutes waiting to get through. He had a critical problem that had to be resolved. He kept waiting. All the time, all he heard was how it was important that he remain on the line and that he would be answered in the order in which he was received. He finally gave up and called Joan in your marketing department. Even then, it took 24 hours before he got an answer. This is unacceptable. Unless you adequately resolve the problems with your phone system, we will take our business else-where. As you are aware, your contract with American Performance Car is going to be up for review in six months. Your product is not so unique that we cannot quickly find an alternative supplier. I am sorry for the angry tenor of this letter. However, this note reflects the frustration that we have experienced. It is totally unacceptable that we cannot even get hold of anyone at American Vinyl after 3 p.m. our time here in California. Your company must become more customer-oriented. Or else. You have 90 days to provide us with an acceptable resolution to the current situation.
As Tom Adamson, the vice president for operations at American Vinyl Products, put down the fax and looked at Brad, the president, Tom knew that things were not good. The phone system had been a persistent source of problems for American Vinyl Products (AVP). Tom knew that this complaint was not an isolated event. He also knew that Brad had commissioned a local telecommunications company to do a study on AVP’s phone system. Their recommendation was that a new system be put in that offered more lines and more staff capacity. Brad thought that this might be the answer. Tom also knew that he would be asked to come up with recommendations for improving the current system.
As Tom got up and left the office, he reviewed the information that he had recently gathered. AVP was a small manufacturer of vinyl and plastic products, including vinyl car products (decals and pin striping for cars), plastic after-market products (new brake lenses for cars designed to make the car look more sporty), and decals for the recreational market (AVP sold name decals to FourWinns in the boating marketing and to Bombardier in the ski-doo and sea-doo markets). Located in Charlotte, Michigan, this company had experienced a great deal of recent growth. Part of the reason for this growth could be traced to the excellent customer service that AVP gave its customers.
AVP sold primarily to three groups of customers. The first were the do-it-yourselfers (DIY). These typically bought vinyl striping from a local retail or car accessory store. As a rule, their purchases were very small yet they needed a great deal of information. Often, they would call AVP asking for a catalog of products, information on how to use AVP’s products (or information on how to correct a problem with an AVP product), or information on where they could get AVP products. As a rule, DIYs were very price sensitive. The second market consisted of professional users. These were the people who used AVP products as part of their business (such as a body shop). While buying a moderate amount of product, they were often more interested in getting very technical information pertaining to the use of an AVP product. They were often considered to be very demanding with the result that only the most experienced sales staff worked with them. Finally, there were large corporate accounts, accounts such as American Performance Car. These accounts would call AVP typically to place orders, to determine the status of current orders, and to see if they could change the status of current orders (change the due date, the order quantities, the product mix, and so on). Typically, their calls were short and to the point. The differences between the three groups are summarized in the table below.

The same phone process served all three customers. All three customers called into the same 1-800 number. Once they called, their calls went into a queue area where they waited until a service representative was available. The calls were answered on a first-come, first-served basis. In this phone-bank area, the current system would periodically remind them that: (1) their call was important, and (2) their calls would be answered in the order received. When the calls were answered, a representative would try to determine the type of customer and then determine what was needed to answer the call. Typically, the representatives would fill in a form (in the case of a catalog request), look up locations of outlets selling their products (done using a large book centrally located), and look up possible solutions from a tips file or generate a follow-up form (in the case of a customer-requested change or status query). When completed, the information would be placed in a large basket for processing. Finally, the representatives would then give the customer a best guess of when they could expect an answer (if further information was needed). Because of the great diversity in the types of calls and the demands of the callers, training and staffing was considered a major obstacle. At present, the line was staffed with 10 representatives on average over an 11-hour period (however, over the two-hour staggered lunch, there were fewer representatives). The department was open from 7:00 a.m. until 6:00 p.m. The rate at which the calls came in was difficult to predict. However, past experience was that it was never level. Finally, since 1995, 40 percent (and growing) of the sales came from California, Washington, Nevada, and Oregon. Unlike Michigan, which is in the Eastern time zone, these states were located three time zones away.

Required:
1. You have been asked to help Tom. What recommendations would you give him about how to improve the operation of the phone system?
2. As mentioned in the case, Tom has a recommendation from a local telecommunications company for increasing the capacity of the phone system. Is this recommendation adequate to help address the problems facing AVP? Make sure that your answer is supported by the appropriate analysis.

The same phone process served all three customers. All three customers called into the same 1-800 number. Once they called, their calls went into a queue area where they waited until a service representative was available. The calls were answered on a first-come, first-served basis. In this phone-bank area, the current system would periodically remind them that: (1) their call was important, and (2) their calls would be answered in the order received. When the calls were answered, a representative would try to determine the type of customer and then determine what was needed to answer the call. Typically, the representatives would fill in a form (in the case of a catalog request), look up locations of outlets selling their products (done using a large book centrally located), and look up possible solutions from a tips file or generate a follow-up form (in the case of a customer-requested change or status query). When completed, the information would be placed in a large basket for processing. Finally, the representatives would then give the customer a best guess of when they could expect an answer (if further information was needed). Because of the great diversity in the types of calls and the demands of the callers, training and staffing was considered a major obstacle. At present, the line was staffed with 10 representatives on average over an 11-hour period (however, over the two-hour staggered lunch, there were fewer representatives). The department was open from 7:00 a.m. until 6:00 p.m. The rate at which the calls came in was difficult to predict. However, past experience was that it was never level. Finally, since 1995, 40 percent (and growing) of the sales came from California, Washington, Nevada, and Oregon. Unlike Michigan, which is in the Eastern time zone, these states were located three time zones away. Required: 1. You have been asked to help Tom. What recommendations would you give him about how to improve the operation of the phone system? 2. As mentioned in the case, Tom has a recommendation from a local telecommunications company for increasing the capacity of the phone system. Is this recommendation adequate to help address the problems facing AVP? Make sure that your answer is supported by the appropriate analysis.


> Rachel loves to bake cookies, but she has an old oven that has trouble maintaining a constant temperature. If the acceptable temperature range for making the cookies is 350 plus or minus 5 degrees, what is the allowable standard deviation in the temperat

> I visited my old pal Dinsmore recently. He had called to let me know that he had taken over as general manager of the Flagship hotel about six months ago, and he thought that I might be interested in seeing a real hotel from the inside. He also indicated

> Roberta Brown sat at her desk and looked through the preliminary slide deck she had prepared. This presentation had to be good. In two weeks she would be giving the presentation to the top management team of Aqua-Fun. The goal: to secure their commitment

> Things were not going well at Bully Boy Products (BBP). BBP was a regional producer of organic fertilizer, potting soil, growing loam, and various gardening products for the discriminating gardener. It had been founded in 1976 when two agriculture studen

> Late on the evening of Sunday, April 14, 1912, RMS Titanic, while on her maiden voyage, struck an iceberg about two days from New York City. Within three hours, she was gone (Monday, April 15, 1912). On this voyage, there were 2,201 passengers and crew m

> Pick a product good or service that you are interested in consuming sometime in the near future. Analyze the offerings of two competing firms. How do the products compare on various dimensions of quality? From these differences, what can you infer about

> The chapter noted that digital technologies are giving firms and their consumers increased visibility into the supply chain and its activities. Would this visibility be important to you? Why? Would you be willing to change your shopping habits in respons

> It has been said that quality management is really a “people” system, more than a technical system. If this is true, what conditions must first be in place for a firm to be successful with quality management? What are the possible repercussions for the f

> A critical concept introduced in this chapter was that of the value proposition. Explore two competing products (e.g., RIM’s Blackberry and Apple’s IPhone). Identify the underlying value propositions present in these products and how this proposition is

> You have been appointed head of quality control for your organization (a firm you have worked at or your college). During the first month, you interview disciples of Deming, Juran, and Crosby. Each seems to be equally affable and competent. Which consult

> Employee empowerment is an essential element of quality management, especially in services. From your own experience, cite instances where a service provider empowered its employee to go the extra mile to delight you. Then indicate an instance where the

> When does it make economical sense to crash project activities? How do you know when to stop?

> What project factors would make you more or less comfortable with a lower probability that the project will be completed on time?

> Suppose that your project has two activity paths of about the same length, but one path is made up of more uncertain activities while the other path is fairly routine. How would you manage the activities on these two paths differently?

> Why does it never make sense to crash activities that are not on the critical path?

> Trail Frames Chassis (TFC) of Elkhart, Indiana, is a major manufacturer of chassis for the motor home and van markets. Since it was founded in 1976 by two unemployed truck-manufacturing engineers, TFC has grown into one of the major suppliers in this mar

> Cemex is one of the world’s largest providers of building materials, mainly concrete and cement (www.cemex.com) for the building of sports complexes, skyscrapers, and high-scale infra-structure (e.g., roads, bridges). The company is over 100 years old an

> Dave Eisenhart, senior editor for Mountain Publishing, Inc., looked out his window as he considered the operational implications of the changes he had just heard discussed in the company’s annual strategic planning meeting. The future looked to be both e

> As his plane landed at Port Columbus International Air- port, Adam Warren, Chief Supply Chain Officer for Sup- ply Chain Operations and Services, (SCOS), switched his phone out of airplane mode and waited for cellular service to resume and the messages h

> When can a consumer be a critical consumer? In other words, when does it make sense to focus on consumers such as retail stores, distributors, or buyers, rather than on the end consumer?

> Select two products that you have recently purchased; one should be a service and the other a manufactured good. Think about the process that you used to make the decision to purchase each item. What product characteristics were most important to you? Wh

> How do you convince the auto industry to accept and sup- port the need to develop and build a super-efficient sport utility vehicle (SUV)? At first glance, this would be a no- brainer. Everyone wants an SUV that is fuel efficient. All that is needed is a

> Lucy, I thought that you told me and the planning committee that this move to recycle storage plastics was going to save us money. But, look here. I just got the bill for last month’s disposal of our plastic. We wound up paying $3,000, rather than being

> Welcome everyone. Robert, please turn on the television.” Vice President of Global Procurement, Stefan Schrettle, started the meeting with these words. The components sourcing and procurement team had been hurriedly assembled at Schrettle’s request. Robe

> The summit meeting at Monolith Productions started promptly on August 20 at 10:45 a.m. The president of the company, Hugo Monolith III, called the meeting of his vice presidents to order. “Ladies and gentlemen, thank you for meeting here on such short no

> Derek had a busy summer ahead of him. It was February 1, and Derek was planning out a summer full of activities that included a backpacking tour of Europe, doing some work for his father, and completing an online summer course offered by his university.

> The Casual Furniture Company (CFC) makes a variety of bookshelves for homes and businesses. The shelves come in various heights, widths, materials, and finishes. Effective requirements planning is essential for CFC’s performance, and it

> Adam Rodriguez, the vice president of supply chain management for QP Industries, sat in his office, contemplating what he had to tell the executive leadership team at tomorrow’s meeting. During the last two years, lead times for transmitting orders betwe

> The following case is based on one of the coauthor’s experiences with an actual company and its management. Fiona Richey knew that she had been given the opportunity of a lifetime. She had just been hired to be an internal troubleshooter and consultant b

> Bill Smith, director of business planning for C&F Apparel, chewed on a pencil as he looked out the window of his fourth-story office. These bad forecasts are killing us, he thought. Forecast errors for the fall season’s sales had ranged from 50 to 200 pe

> Rachel Kirkpatrick thought to herself, “What a waste,” as she threw away three bags full of unsold items and spoiled ingredients. “I have to get better at estimating how much food to order and prepare

> How would you define capabilities within a school or business?

> Lear Corporation, headquartered in Southfield, Michigan, is one of the world’s 10 largest independent automotive suppliers and the leading player in the $45 billion global auto interiors market. This market consists of such items as seating systems, inte

> Elise Lovejoy, the new logistics coordinator at Spartan Plastics, was looking at the stack of papers and the two computer screens in front of her. It was Friday afternoon— the Friday before the long weekend—and she sti

> The five-year dining services contract at Midwest University, a residential campus with 20,000 students located in Ohio, is expiring in three months. The supplier must be able to perform all aspects of dining services operations including menu planning,

> Trail Frames Chassis (TFC) of Elkhart, Indiana, is a major manufacturer of chassis for the motor home and van markets. Two unemployed truck-manufacturing engineers founded TFC in 1976. Since then, the company has grown into one of the largest suppliers o

> Karen Williams, the new director of supply management at Best Banks, was excited to be working at her new job. After gaining over 10 years of experience in various supply management positions at a first-tier automotive supplier, she was looking forward t

> Harry Chamberlain, vice president of Tiler Industries, closed the phone call by saying, “Well thanks, Jim. We appreciate the call even though it was bad news. We’re sorry we didn’t get the contract for the SRW installation from Phoenix, but we understand

> It was a tough year for Western Telephone Manufacturing (WTM) of Canton, Michigan. Until this year, WTM had been the darling of Wall Street. This company had become one of the first to wholly embrace the concepts of Six Sigma and Total Quality Management

> Jane Polski, the newly hired director of university purchasing, took one final look at the report from her purchasing manager, removed her glasses, and rubbed the bridge of her nose. Surely, she thought, things could not be that bad. According to the rep

> Good Guy Hospital Supply (GGHS) was founded in the 1960s to serve the hospital and nursing home industry. Since then, its sales have grown an average of 26 percent per year, through both geographical expansion and increased existing-market penetration. K

> Dexter pored over the table of data he had compiled using inputs from purchasing, internal inventory managers, accounting, and Disco (Dexter’s Chicken’s purchasing co-op and sole distributor). He hoped that he had enough information to make a well-founde

> Apply the corporate/SBU/functional planning hierarchy introduced in this chapter to your university/college or business. What would be the equivalent to corporate planning? SBU planning? Functional Planning?

> Tasty Treats is a distributor of candy and snack products serving customers in a six-state region of the Midwest ern United States. Bill Jones, chief operations officer, has been concerned about inventory levels and inventory performance at Tasty Treats

> Champion Electric, a regional supplier of electrical and electronic components, keeps thousands of SKUs (stock keeping units) of various products on hand for its customers. A new operations manager, Barb Patterson, has just been hired to replace Bob, who

> As he stopped to refill his coffee mug, Roger Terry began to recall some of the comments he had heard from various members of the single-block product development team (see the comments reproduced below). The following comments were gathered from informa

> The ALPHA single-block timer development project had not gone exactly as planned. The product development time-to-market was 48 months instead of the planned 30 months, and capital expenditures for the project were at least 30 percent over budget. On the

> Roger Terry hurried down the hallway toward the planning meeting for the ALPHA timer product development project. Terry had served as project manager for the initial stage of the ALPHA single-block product development, and he was now preparing to start t

> I can’t see why you have to spend so much time looking at our processes. Hey, we have everything under control. It has been over five years since we got our last EPA inspection and nearly six years since we got our last major citation a

> You are the purchasing director for Midas Gold Juice Company, a small Midwestern fruit-juice company that produces a line of premium, limited-run fruit juice (Slogan: Midas Juice—you’ll be touched by the Gold). As one of your responsibilities, you review

> The top managers of Evergreen Products of East Lansing, MI, have asked you to act as a consultant on a problem plaguing the entire company. Evergreen Products manufactures decorated containers and care tags for a market consisting primarily of small- to

> Steinway pianos have long been the premier brand among serious pianists. Franz Liszt called his Steinway “a glorious masterpiece.” Gioacchino Rossini, a 19th-century com-poser, described the Steinway sound as “great as thunder, sweet as the fluting of a

> Why should the firm never outsource its core capabilities? What happens if the firm is approached by a supplier who is willing to supply goods and services based on these core capabilities at a significantly lower price? What should the firm do?

> Otis Toy Trains of Minneapolis, Minnesota, was a land-mark company in the toy business. Since the 1900s, it had been responsible for building electrical and steam-driven toy trains. Since the 1950s, Otis trains had developed a major presence on children’

> It was late on Friday, and Lisa Jacobs, the CEO of Lil’ Me Dolls, re-read the document before her. It was a proposal from the MOT (Millions of Toys) retail toy chain offering to carry the Lil’ Me line of dolls. At first glance, this seemed to be too good

> The American South and the American Midwest experience natural disasters on a regular basis (hurricanes such Hurricane Katrina in the American South and tornados in the American Midwest). Whenever such a disaster takes place, organizations such as the Am

> One common approach that companies use to protect human rights is a supplier code of conduct. How can you increase the effectiveness of a code of conduct?

> The Triple Bottom Line can be viewed as a three-legged stool in that each element must be present or, if one or more elements are removed, then the entire structure collapses. To what extent do you agree with this approach? Why is it important that each

> Why is it that some managers are not willing to pursue more aggressively environmental sustainability even when presented with compelling reasons for its need? (HINT: think about issues such level of resources available, risk of failure, and how the mana

> What are some operations/supply chain management strategies that can be used to deal with the challenges of diminishing natural resources?

> In a recent study by MIT, it was found that the Toyota Prius, a hybrid, was less environmentally responsible than a Hummer SUV. How could this be? You might want consider using the AT&T Environmental Assessment Matrix in addressing this question.

> What would the business model look like if we were to compete primarily on environmental sustainability?

> Why does the concept of “cradle to grave” no longer make business and environmental sense?

> Using a SWOT analysis, can the operations management system be a strength? Can the operations management system be a weakness? Provide examples.

> Have you ever stayed at an Air BnB? If so, why? To what extent was your decision influenced by the price, the location, or the experience that the Air BnB offered?

> Have you ever used social media to decide what products to buy or even where to go for a vacation? Provide some examples. Have negative reviews on social media ever caused you to avoid buying a certain product? Why?

> How could the Internet of Things affect such activities as you visiting a store to buy a product?

> Recently, companies such as Verizon, Automatic, and Zubie have introduced a module that plugs into the diagnostic port of most cars. This module keeps track of the status of the car and informs the user of any problems (explaining the problems in plain E

> Review the new strategic direction for Unilever, as presented at the beginning of this chapter. What are the economic rationales for these seven key strategic imperatives? What are the risks? To what extent are these initiatives driven by concerns of env

> What are the differences between a project objective statement, a project charter, and a project business case?

> What strengths do you possess that would make you an excellent project manager? In what areas do you need to improve?

> Suppose that you are the leader of a project aimed to quickly develop and explore radical new business opportunities that exploit the company’s strengths in supply chain management. What types of personnel would you want on your team? How would you organ

> At what point in the life of a project does the project manager have the greatest ability to influence the success of the project? Name three things you would try to get executive sponsors of a project to agree to before you accepted the job as project m

> Think of the last project in which you participated that did not go as well as planned (e.g., this could be a team assignment for a class). Were the causes of failure mainly social or technical in nature? Explain.

> In this chapter, you were introduced to Huffy Bicycles. You were also told that the critical customers were store managers and purchasing managers. Now, assume that Huffy decided to target first parents and then children as their critical customers (usin

> What are some of the assumptions underlying the critical path method (CPM)? Can you think of situations in which the CPM assumptions would not be valid?

> What impact will a supplier’s quality and delivery problems have on a company using MRP? Why?

> How do L4L, FOQ, and POQ ordering policies impact set-up/ordering costs and inventory costs? Why?

> As an organization increases its level of outsourcing, what will be the impact on its bill of materials? Why?

> What problems can MRP create for suppliers as you go upstream in the supply chain? Why?

> What types of companies are likely to benefit the most from using MRP? Why?

> What is the relationship between cumulative lead time and changes in the MPS? Why?

> The planning process involves a rolling time horizon. What does this mean to a planner?

> Why is collaboration within an organization and the supply chain important when using DRP and MRP?

> How have advances in computer technology changed the planning process? Why? What changes do you expect in the future?

> Elm Furniture Company, a medium-sized, publicly traded manufacturer of wood-based office and home furniture systems, has agreed that its major goal should be to “Become recognized as a value and social leader in the wood furniture industry.” Consistent w

> In what ways are DRP and MRP similar and how are they different?

> Why are spare parts and service parts considered to be independent demand, not dependent demand?

> In one of this chapter’s “Get Real” stories, you read about the experiences of Nintendo in planning production of its Switch system. If you were on the aggregate planning team for the Switch, would you plan for average demand or for peak demand, and why?

> In most companies that are considered to be successful users of the S&OP process, the resulting plans and commitments are treated, essentially, as “quasi-contracts.” That is, the agreement reached between the various parties cannot be unilaterally broken

> If most aggregate production planning problems include assumptions and ignore many needs of the company that are difficult to quantify, then what is the benefit of the process?

> Explain why the following is not necessarily a true statement: “If a company is chasing demand, then it is overinvesting in balance-sheet assets since inventories will be high.”

> Suppose your firm is using a level production planning approach to manage a seasonal demand. Your production manager is evaluated on lowest production cost but the logistics manager is evaluated on the amount of inventory the firm holds. Explain the issu

> What are the key cost advantages of level production strategy over a chase strategy? Of a chase strategy over a level production strategy?

> Do you think chase strategies might be more appropriate in some industries than in others? Give some examples and explain why.

> Explain in your own words the typical differences in objectives for production managers and sales managers.

> As North American firms increasingly turn to product innovation, the management and protection of Intellectual Property becomes an important issue. Discuss how intellectual property considerations can affect such areas in supply chain strategy as: a. Sup

> What is the value of the S&OP process to an organization? Why should it be a dynamic process rather than a one-time annual event?

> What arguments would you use in order to justify tightening the limits used on a tracking signal control chart? How about for loosening the limits?

> As the regional manager of 27 Burger Queens, you are thinking about expanding the number of outlets in your area. What types of forecasts would you want to create in order to support your decision?

2.99

See Answer