[SOLVED] A sample of 9 customers in the “

> Time (in seconds) to serve an early-morning customer at a fast-food restaurant is normally distributed. Set up a control chart for the mean serving time, assuming that serving times were sampled in random subgroups of 4 customers. Note: Use this sample o

> Set up control limits for an chart, given μ = 400, σ = 2, and n = 4.

> Set up control limits for an chart, given = 12.50, = .42, and n = 5.

> Use MINITABâs Stat > Basic Statistics > Normality Test or other software to obtain a probability plot for the Ashoka Curry House carry-out order data (see Exercise 15.16). Interpret the probability plot and Anderson-Darling statis

> Refer to the freezer problem 17.51 with Î¼ = 23 and Ï = 2. Temperature measurements are recorded four times a day (at midnight, 0600, 1200, and 1800). Twenty samples of four observations are shown below. Problem 17.51: The tem

> Refer back to the regression equation in exercise 12.14: Credits = 15.4 - .07 Work. (a) Calculate the residual for the x, y pair (14, 18). Did the regression equation underestimate or overestimate the credits? (b) Calculate the residual for the x, y pair

> Refer to the paint thickness problem 17.49. Assume Î¼ = 1.00 and Ï = 0.07. Use the following 35 individual observations on paint thickness to answer the questions posed. Problem 17.49: In painting an automobile at the factory,

> Concerning confidence intervals, which statement is most nearly correct? Why not the others? a. We should use z instead of t when n is large. b. We use the Student’s t distribution when σ is unknown. c. Using the Student’s t distribution instead of z na

> In painting an automobile at the factory, the thickness of the color coat has a process mean of 1.00 mil and a process standard deviation of 0.07 mil. Twenty samples of five cars were tested, resulting in the mean paint thicknesses shown below. (a). C

> Refer to the bolt strength problem 17.47. Assume Î¼ = 6,050 and Ï = 100. Use the following 24 individual bolt strength observations to answer the questions posed. Problem 17.47: The yield strength of a metal bolt has a mean of

> The yield strength of a metal bolt has a mean of 6,050 pounds with a standard deviation of 100 pounds. Twenty samples of three bolts were tested, resulting in the means shown below. (a). Construct upper and lower control limits for the chart, using th

> Refer back to the regression equation in exercise 12.12: NetIncome = 2,277 + .0307 Revenue. Recall that the variables are both in millions of dollars. (a) Calculate the residual for the x, y pair ($41,078, $8,301). Did the regression equation underestima

> A regression model to predict the price of a condominium for a weekend getaway in a resort community included the following predictor variables: number of nights needed, number of bedrooms, whether the condominium complex had a swimming pool or not, and

> An agribusiness performed a regression of wheat yield (bushels per acre) using observations on 25 test plots with four predictors (rainfall, fertilizer, soil acidity, hours of sun). The standard error was 1.17 bushels. Find the approximate width of a 95

> A regression of accountants’ starting salaries in a large firm was estimated using 40 new hires and five predictors (college GPA, gender, score on CPA exam, years’ prior experience, size of graduating class). The standard error was $3,620. Find the appro

> (a) Interpret the slope of the fitted regression Computer power dissipation = 15.73 + 0.032 Microprocessor speed, where Power dissipation is measured in watts and Microprocessor speed is measured in MHz. (b) What is the prediction for Power dissipation i

> Define (a) productivity, (b) quality control, and (c) process control.

> Why are the control limits for an R chart asymmetric, while those of an chart are symmetric?

> Which statement is false? Explain. a. If P(A) = .05, then the odds against event A’s occurrence are 19 to 1. b. If A and B are mutually exclusive events, then P (A ∪ B) = 0. c. The number of permutations of 5 things taken 2 at a time is 20.

> Bob said, “They must not be using quality control in automobile manufacturing. Just look at the J.D. Power data showing that new cars all seem to have defects.” (a) Discuss Bob’s assertion, focusing on the concept of variation. (b) Can you think of proce

> Define three quality metrics that might be used to describe quality and performance in the following consumer products: (a) your personal vehicle (e.g., car, SUV, truck, bicycle, motorcycle); (b) the printer on your computer; (c) the toilet in your bathr

> (a) Plot the data on lightning deaths. (b) Describe the trend (if any) and discuss possible causes. (c) Fit an exponential trend to the data. Interpret the fitted equation. (d) Make a forecast for 2015, using a trend model of your choice (or a judgment f

> (a) Plot the data on leisure and hospitality employment. (b) Describe the trend (if any) and discuss possible causes. (c) Fit the linear and exponential trends. Would these trend models give credible forecasts? Explain. (d) Make a forecast for 2008, usin

> For each of the following fitted trends, make a prediction for period t = 17: a. yt = 2286 e.076t b. yt = 1149 + 12.78t c. yt = 501 + 18.2t - 7.1t2

> In a test of the regression model Y = β0 + β1X with 27 observations, what is the critical value of t to test the hypothesis that β1 = 0 using α = .05 in a two-tailed test? a. 1.960 b. 2.060 c. 1.708

> Based on the information in this ANOVA table, the coefficient of determination R2 is a. 0.499 b. 0.501 c. 0.382 ANOVA Table Source Sum of Squares df Mean Square F p-Value 158.3268 Regression Residual 1 158.3268 24.88 0.00004 159.0806 25 6.3632 To

> Which statement is incorrect? Explain. a. Correlation uses a t-test with n - 2 degrees of freedom. b. Correlation analysis assumes that X is independent and Y is dependent. c. Correlation analysis is a test for the degree of linearity between X and Y.

> Given a sample correlation coefficient r = .373 with n = 30, can you reject the hypothesis ρ = 0 for the population at α = .01? Explain, stating the critical value you are using in the test.

> Given the following ANOVA: (a). How many ATM locations were there? (b). What was the sample size? (c). At Î± = .05, is there a significant effect due to Day of Week? (d). At Î± = .05, is there a significant interaction?

> If P (A) = .30, P (B) = .70, and P (A ∩ B) = .25, are A and B independent events? Explain.

> Given the following ANOVA table, find the F statistic and the critical value of F.05. Source Sum of Squares df Mean Square F Treatment 744.00 4. Error 751.50 15 Total 1,495.50 19

> Which statement is incorrect? Explain. a. We need a Tukey test because ANOVA doesn’t tell which group means differ. b. Hartley’s test is needed to determine whether the means of the groups differ. c. ANOVA assumes equal variances in the k groups being c

> In this regression with n = 40, which predictor differs significantly from zero at Î± = .01? a. X2 b. X3 c. X5 Coefficients Std. Error Intercept 3.210610 0.918974 X1 -0.034719 0.023283 X2 0.026794 0.039741 X3 -0.048533 0.000272 0.009

> Which predictors differ significantly from zero at Î± = .05? a. X3 only b. X4 only c. both X3 and X4 Coefficients Std. Error p-Value Intercept X1 23.3015 4.1948 0.0000 0.2100 -0.227977 0.178227 X2 0.218970 0.300784 0.4719 X3 -0.34365

> Which predictor coefficients differ significantly from zero at Î± = .05? a. X3 and X5 b. X5 only c. all but X1 and X3 Coefficients Std. Error Lower 95% Upper 95% Intercept 22.47427 6.43282 9.40122 35.54733 X1 -0.243035 0.162983 -0.57

> For a multiple regression, which statement is false? Explain. a. If R2 = .752 and R2 adj = .578, the model probably has at least one weak predictor. b. R2 adj can exceed R2 if the model contains some very strong predictors. c. Deleting a predictor could

> (a) Plot the data on skier/snowboard visits. (b) Would a fitted trend be helpful? Explain. (c) Make a forecast for 2007â2008, using a trend model of your choice (or a judgment forecast). U.S. Skier/Snowboarder Visits, 1984-2007 (mi

> The process that produces Sonora Bars (a type of candy) is intended to produce bars with a mean weight of 56 grams (g). The process standard deviation is known to be 0.77 g. A random sample of 49 candy bars yields a mean weight of 55.82 g. (a). State t

> Given H0: μ > 18 and H1: μ < 18, we would commit Type I error if we a. conclude that μ > 18 when the truth is that μ < 18. b. conclude that μ < 18 when the truth is that μ > 18. c. fail to reject μ > 18 when the truth is that μ < 18.

> Given n1 = 8, s1 = 14, n2 = 12, s2 = 7. (a). Find the test statistic for a test for equal population variances. (b). At α = .05 in a two-tailed test, state the critical value and degrees of freedom.

> For the following contingency table, find (a) P (H â© T); (b) P (S | G); (c) P(S) R Row Total 10 50 30 90 H 20 50 40 110 Col Total 30 100 70 200

> Which statement is correct concerning the normal approximation? Why not the others? a. The normal Poisson approximation is acceptable when λ > 10. b. The normal binomial approximation is better when n is small and π is large. c. Normal approximations are

> In a random sample of 200 Colorado residents, 150 had skied at least once last winter. A similar sample of 200 Utah residents revealed that 140 had skied at least once last winter. At α = .025, is the percentage significantly greater in Colorado? Explain

> Which of the following Excel formulas would be a correct way to calculate P(X < 450) given that X is N(500, 60)? a. =NORM.DIST(450, 500, 60, 1) b. =NORM.S.DIST(450, 60) c. =1–NORM.DIST(450, 500, 60, 0)

> A consulting firm used a random sample of 12 CIOs (chief information officers) of large businesses to examine the relationship (if any) between salary (in thousands) and years of service in the firm. (a). Make a scatter plot and describe it. (b). Calc

> Five students in a large lecture class compared their scores on two exams. âLooks like the class mean was higher on the second exam,â Bob said. (a). What kind of test would you use? (b). At Î± = .10, w

> Find the mean, standard deviation, and coefficient of variation for X = 5, 10, 20, 10, 15.

> Which statement is incorrect? Explain. a. If p = .50 and n = 100, the estimated standard error of the sample proportion is .05. b. In a sample size calculation for estimating π, it is conservative to assume π = .50. c. If n = 250 and p = .07 it is not s

> Which statement is false? Explain. a. To find probabilities in a continuous distribution, we add up the probabilities at each point. b. A uniform continuous model U(5,21) has mean 13 and standard deviation 4.619. c. A uniform PDF is constant for all valu

> A sample of 16 ATM transactions shows a mean transaction time of 67 seconds with a standard deviation of 12 seconds. (a). State the hypotheses to test whether the mean transaction time exceeds 60 seconds. (b). Find the test statistic. (c). At α = .02

> Which statement is not correct? Explain. a. The sample data x1, x2, . . . , xn will be approximately normal if the sample size n is large. b. For a skewed population, the distribution of / is approximately normal if n is large. c. The expected value of /

> A regression model to predict Y, the state burglary rate per 100,000 people for 2005, used the following four state predictors: X1 = median age in 2005, X2 = number of 2005 bankruptcies, X3 = 2004 federal expenditures per capita (a leading predictor), an

> A random sample of 502 Vail Resortsâ guests were asked to rate their satisfaction on various attributes of their visit on a scale of 1â5 with 1 = very unsatisfied and 5 = very satisfied. The regression model was Y = ov

> A sample of 74 Noodles & Company restaurants was used to perform a regression analysis with Y = % Annual Revenue Growth and X = % Revenue Due to Loyalty Card Use. Calculate the leverage statistic for the following three restaurants and state whether or n

> A sample of season performance measures for 29 NBA teams was collected for a season. A regression analysis was performed on two of the variables with Y = total number of free throws made and X = total number of free throws attempted. Calculate the levera

> An estimated regression for a random sample of vehicles is MPG = 49.22 - 0.081 Horsepower, where MPG is miles per gallon and Horsepower is the engine’s horsepower. The standard error is se = 2.03. Suppose an engine has 200 horsepower and its actual (obse

> Observations are taken on net revenue from sales of a certain LCD TV at 50 retail outlets. The regression model was Y = net revenue (thousands of dollars), X1 = shipping cost (dollars per unit), X2 = expenditures on print advertising (thousands of dollar

> In the previous problem, calculate (a) the 95th percentile of vehicle speeds (i.e., 95 percent below); (b) the lowest 10 percent of speeds; (c) the highest 25 percent of speeds (3rd quartile).

> (a) Make an Excel scatter plot. What does it suggest about the population correlation between X and Y? (b) Make an Excel worksheet to calculate SSxx, SSyy, and SSxy. Use these sums to calculate the sample correlation coefficient. Check your work by using

> Review the two residual plots below. Do either of these show evidence that the regression error assumptions of normality and constant variation have been violated? Explain. X -3.0 -2.0 -1.0 0.0 1.0 2.0 3.0 Normal Score Residual Residuals

> Review the two residual plots below. Do either of these show evidence that the regression error assumptions of normality and constant variation have been violated? Explain. -3.0 -2.0 -1.0 0.0 1.0 2.0 3.0 Normal Score Residual

> Study the table of residuals. Identify as outliers any standardized residuals that exceed 3 and as unusual any that exceed 2. Can you suggest any reasons for these unusual residuals? Midterm and Final Exam Scores for Business Statistics Students Fall S

> Refer to the Revenue and Profit data set below. Data are in billions of dollars. (a) Use MegaStat or MINITAB to find confidence and prediction intervals for Y using the following set of x values: 1.8, 15, and 30. (b) Report the 95 percent confidence inte

> Refer to the Weekly Earnings data set below. (a) Use MegaStat or MINITAB to find confidence and prediction intervals for Y using the following set of x values: 12, 17, 21, 25, and 30. (b) Report the 95 percent confidence interval and prediction interval

> (a) Use Excel’s Data Analysis > Regression (or MegaStat or MINITAB) to obtain regression estimates. (b) Interpret the 95 percent confidence interval for the slope. Does it contain zero? (c) Interpret the t test for the slope and its p-value. (d) Interpre

> (a) Use Excelâs Data Analysis > Regression (or MegaStat or MINITAB) to obtain regression estimates. (b) Interpret the 95 percent confidence interval for the slope. Does it contain zero? (c) Interpret the t test for the slope and its

> Below is a regression using X = average price, Y = units sold, n = 20 stores. (a) Write the fitted regression equation. (b) Write the formula for each t statistic and verify the t statistics shown below. (c) State the degrees of freedom for the t tests a

> Below is a regression using X = home price (000), Y = annual taxes (000), n = 20 homes. (a) Write the fitted regression equation. (b) Write the formula for each t statistic and verify the t statistics shown below. (c) State the degrees of freedom for the

> A regression was performed using data on 16 randomly selected charities. The variables were Y = expenses (millions of dollars) and X = revenue (millions of dollars). (a) Write the fitted regression equation. (b) Construct a 95 percent confidence interval

> Which probability distribution (uniform, binomial, Poisson) is most nearly appropriate to describe each situation (assuming you knew the relevant parameters)? a. The number of dimes older than 10 years in a random sample of 8 dimes. b. The number of hos

> A regression was performed using data on 32 NFL teams. The variables were Y = current value of team (millions of dollars) and X = total debt held by the team owners ( millions of dollars). (a) Write the fitted regression equation. (b) Construct a 95 perc

> (a) Based on the R2 and ANOVA table for your model, how would you assess the fit? (b) Interpret the p-value for the F statistic. (c) Would you say that your modelâs fit is good enough to be of practical value? Midterm and Final Exam S

> (a) Perform a regression using MegaStat or Excel. (b) State the null and alternative hypotheses for a two-tailed test for a zero slope. (c) Report the p-value and the 95 percent confidence interval for the slope shown in the regression results. (d) Is th

> Using the “Metals” data, construct a correlation matrix of the six independent variables. The response variable is Priceylb. (a). Identify any pairs of independent variables that have a significant pairwise correlation. (b). Using MegaStat or MINITAB,

> (a) Use Excel to make a scatter plot of the data. (b) Select the data points, right-click, select Add Trendline, select the Options tab, and choose Display equation on chart and Display R-squared value on chart. (c) Interpret the fitted slope. (d) Is the

> (a) Make an Excel worksheet to calculate SSxx, SSyy, and SSxy (the same worksheet you used in exercises 12.2 and 12.3). (b) Use the formulas to calculate the slope and intercept. (c) Use your estimated slope and intercept to make a worksheet to calculate

> Refrigerator prices are affected by characteristics such as whether or not the refrigerator is on sale, whether or not it is listed as a Sub-Zero brand, the number of doors (one door or two doors), and the placement of the freezer compartment (top, side,

> A regression model to predict the price of diamonds included the following predictor variables: the weight of the stone (in carats where 1 carat = 0.2 gram), the color rating (D, E, F, G, H, or I), and the clarity rating (IF, VVS1, VVS2, VS1, or VS2). (

> Which statement is false? Explain. a. If μ = 52 and σ = 15, then X = 81 would be an outlier. b. If the data are from a normal population, about 68 percent of the values will be within μ ± σ. c. If μ = 640 and σ = 128 then the coefficient of variation is

> (a) Does the 95 percent confidence interval for the slope include zero? If so, what does this tell you? If not, what does it mean? (b) Do a two-tailed t test for zero slope at Î± = .05. State the hypotheses, degrees of freedom, and critical

> Below are fitted regressions for Y = asking price of a used vehicle and X = the age of the vehicle. The observed range of X was 1 to 8 years. The sample consisted of all vehicles listed for sale in a particular week. (a) Interpret the slope of each fitte

> The regression equation Credits = 15.4 -.07 Work was estimated from a sample of 21 statistics students. Credits is the number of college credits taken and Work is the number of hours worked per week at an outside job. (a). Interpret the slope. (b). Is

> The regression equation HomePrice = 51.3 + 2.61 Income was estimated from a sample of 34 cities in the eastern United States. Both variables are in thousands of dollars. HomePrice is the median selling price of homes in the city, and Income is median fam

> The regression equation NetIncome = 2,277 + .0307 Revenue was estimated from a sample of 100 leading world companies (variables are in millions of dollars). (a). Interpret the slope. (b). Is the intercept meaningful? Explain. (c). Make a prediction o

> (a) Interpret the slope of the fitted regression Number of International Franchises = -47.5 + 1.75 Power Distance Index. The Power Distance Index is a measure on a scale of 0–100 of the wealth gap between the richest and poorest in a country. (b) What is

> Observations are taken on sales of a certain mountain bike in 30 sporting goods stores. The regression model was Y = total sales (thousands of dollars), X1 = display floor space (square meters), X2 = competitorsâ advertising expenditure

> Observations are taken on net revenue from sales of a certain LCD TV at 50 retail outlets. The regression model was Y = net revenue (thousands of dollars), X1 = shipping cost (dollars per unit), X2 = expenditures on print advertising (thousands of dollar

> Refer to the ANOVA table below. (a) State the degrees of freedom for the F test for overall significance. (b) Use Appendix F to look up the critical value of F for Î± = .05. (c) Calculate the F statistic. Is the regression significant overal

> (a) Make a scatter plot of the data. What does it suggest about the correlation between X and Y? (b) Use Excel, MegaStat, or MINITAB to calculate the correlation coefficient. (c) Use Excel or Appendix D to find t.025 for a two-tailed test at Î&plu

> (a) Make an Excel scatter plot. What does it suggest about the population correlation between X and Y? (b) Make an Excel worksheet to calculate SSxx, SSyy, and SSxy. Use these sums to calculate the sample correlation coefficient. Check your work by using

> Use Excel, MegaStat, or MINITAB to fit the regression model, including residuals and standardized residuals. Midterm and Final Exam Scores for Business Statistics Students Fall Semester 2011 (n = 58 students) Midterm Exam Score â¦&ac

> Which statement is true? Why not the others? a. We expect the median to exceed the mean in positively skewed data. b. The geometric mean is not possible when there are negative data values. c. The midrange is resistant to outliers.

> For each sample, do a test for zero correlation. (a) Use Appendix D to find the critical value of tÎ±. (b) State the hypotheses about Ï. (c) Perform the t test and report your decision. Appendix D: a. r = +.45, n = 20, Î&

> A box of Wheat Chex cereal is to be filled to a mean weight of 466 grams. The lower specification limit is 453 grams (the labeled weight is 453 grams) and the upper specification limit is 477 grams (so as not to overfill the box). The process standard de

> A new type of smoke detector battery is developed. From laboratory tests under standard conditions, the half-life (defined as less than 50 percent of full charge) of 20 batteries are shown below. (a). Make a histogram of the data and/or a probability p

> A Nabisco Fig Newton has a process mean weight of 14.00 g with a standard deviation of 0.10 g. The lower specification limit is 13.40 g and the upper specification limit is 14.60 g. (a). Describe the capability of this process, using the techniques you

Question: A sample of 9 customers in the “

Applied Statistics Definitions

View More Applied Statistics Definitions